What to use as a door.

[Remidianz]

Hello all;
I am building my rooms currently and I have two doorways both 78"x28". I am trying to think of something to use as a door that would keep the light out.

Do not answer with...Door lol

 

[GSTrichome79]

https://www.rollitup.org/grow-room-design-setup/472399-entrance-door-new-6x6x6-grow.html

Lots of ideas on that thread, but without more information on what you're working with it's kinda hard to answer. Like, budget, tent or wood frame, and etc. etc. Look through the thread, but for cheap and easy I would suggest some black vinyl sheeting

 

[machnak]

Use to 'Panda Film' AKA Poly Paper or Poly Film. Then buy a 'Tarp Zip-up'. BAM! Light-proof and sealed.

Panda Paper -
http://www.google.com/products/cata...=X&ei=skrMTr2-C6zXiAL2kfzuCw&ved=0CIEBEPMCMAA

Tarp Zip-Up
http://www.google.com/products/cata...a=X&ei=ykrMTtOVJamViQLc3529Cw&ved=0CHQQ8wIwAA

Any hydro store should have both. I know home depot has the tarp zip-ups as well. Hope that helps.

 

[Remidianz]

I am going to check that thread out ty. Its a wooden frame. The bottom is carpet.

You rock that Velcro vinyl thing may be an option for me. I would have to cut a piece of wood to put at the the bottom of my doorway, but I think I am going to have to do that anyway.

 

[machnak]

You can also check the thread in my link to see how I've used it before.

 

[Remidianz]

Ill post pics later but here is where my concern is. I am not concerned about someone seeing the light. My grow room is in a insulated room in the basement with a door(hurray me!) The problem I am looking at now is the veg and bud room will be next to each other, I plan on using mylar to cover the skeleton frame I put up and use it as a wall. Well What to do to stop the light from the veg room getting into the bud room.

My camera blows I will post pictures tomorrow during the day, they will be easier to see.

Those viny zipper doors would rock. I hope home depot has them.

How is that door attached? Do you have in that thread how you installed it?**Nevermind...staples lol! Glad I bought a staple gun. I will be posting tomorrow what my plans are to grow with pics.

**Actually how do you have it setup on the bottom of the "vinyl door" so no light gets in?

 

[machnak]

Yea, you're best bet is going to be the film and door.

 

[matthebrute]

be carefull as just plain mylar does allow light to pass through (so i have heard and saw a pic!!) might want to grab some of thet roofing tar paper stuff and staple that up on the dividing wall. then spray adhesive the mylar to the tar paper

not that this has anything to do with your door situation but seemed like you had that covered

 

[tbanga]

I would just use some sheeting with either valcro or a zipper would be fine. Woah i didn't know Google had a product search that is amazing!

 

[Remidianz]

be carefull as just plain mylar does allow light to pass through (so i have heard and saw a pic!!) might want to grab some of thet roofing tar paper stuff and staple that up on the dividing wall. then spray adhesive the mylar to the tar paper

not that this has anything to do with your door situation but seemed like you had that covered

Good point. Its not actually Mylar its this stuff
http://www.revolutionhydroponics.com/product_info.php?products_id=1766

Damn you have a good point though. I was trying to get away from cutting plywood for walls. Hmm roofing tar paper...hmmm

 

[matthebrute]

ah alright, still the tar paper would be more solid than just stapleing it to the studs.

that paper is hella expensive ><

 

[Orithil]

Seriously? You can't just get a door? Or even a bit of wood and some hinges and mount a door? You have to come on a site about growing bud...to ask about a DOOR.

Note avatar, note my going to smoke a TON, because seriously? ARE YOU KIDDING ME?

 

[matthebrute]

Seriously? You can't just get a door? Or even a bit of wood and some hinges and mount a door? You have to come on a site about growing bud...to ask about a DOOR.

Note avatar, note my going to smoke a TON, because seriously? ARE YOU KIDDING ME?

the guy is simply looking for suggestions from other people with more experience.

go smoke a ton and be a twat elswhere DOUCHEBAG!!

 

[GSTrichome79]

http://www.homedepot.com/Building-M...splay?langId=-1&storeId=10051&catalogId=10053

Something like that, or foam board insulation panels with the aluminum facing would be killer wall material. Use metal duct tape to cover the seams where things meet or overlap and you're good.

 

[fireproof]

I'd stay away from roofing tar/felt/paper. That stuff has chemicals in it and is generally just no fun to deal with when it's been exposed to heat. The foam board sounds good. Plain styrofoam boards are cheap and can be torn down and crushed into garbage bags quickly.

 

[Orithil]

Seriously? You can't just get a door? Or even a bit of wood and some hinges and mount a door? You have to come on a site about growing bud...to ask about a DOOR.

Note avatar, note my going to smoke a TON, because seriously? ARE YOU KIDDING ME?

I was being a douchebag, yes. I wasn't medicated at that point and it hit me wrong. Apologies.

 

[Remidianz]

If I built a door...it would not be the quality I want. It would drive me crazy until I payed a carpenter to do it correctly for me.

Anyway..
Those Styrofoam pads are a dam good idea. I am going to Homedepot today to pick something out. Yea I thought that mylar substitute was expensive, and I am currently looking at alternatives.

 

[Remidianz]

OMG yea fuck that. There are 4'x100' rolls of mylar on Ebay for $40. Yup getting that lol.

 

[smokey mcsmokester]

I personally use some thick white sheets for my door... Or a white comforter....

 

[Stark Raving]

The bottom is carpet.

I know it's off topic, but are you saying that the floor of your grow room is carpet? If so, not a good idea. If not, sorry I misunderstood.

Carpet and mold/bacteria/insects go together like weed and the munchies.