BHO with Vacuum oil/wax tutorial

Guzias1

Well-Known Member
Ummm so you assuming around 1can/72grams at 7 cans/500grams of nug? That might be fairly accurate if my whole dbl soaked butane method works out. If you're able to retain all the butane with near zero boil off during the soak then i think you can assume that if you're able to soak 40ish gram of nug in one thermos with one can or so you should be able to flip it and soak another 40ish grams of nug. Wow now i'm really getting excited because if this works well I might have started a "1st" lol as long as i don't find anybody else who has tried it :)
I will try my best to grind down the material, so i can fit about 40 grams in each soak..
i need to figure out how i will retain as much tane as possible, i dont know if i have ANY thermos laying around.. And i just realized, temps will most likely be around low 60s.. shiet, i may just invest some moreeeeeeeeeeeeeee money into this for some thermoses
 

vacpurge

New Member
yes the evap pot complicates things. just something I found one day. found it interesting. taught me something, maybe could teach someone here something too.
 

650baquet

Active Member
I GET THE POINT I"LL DBL SPACE WTF LAY OFF ME hahaha jk i'm glad you mentioned it

Not too hard to under start just wish it was dbl spaced! :P does this device recover any of the butane used during the steeping process for more uses? If not, maybe that could be achieved with slight modifications.
 

650baquet

Active Member
IMG_20130424_151221_314.jpg it would be nice to have something simple like this for the dbl soak method deal i'm talking about
Pack both containers and fill one container with butane, screw together, soak, flip, soak, unscrew and filter into pan. Might be more applicable to second soaks of material.
 

Guzias1

Well-Known Member
View attachment 2629722 it would be nice to have something simple like this for the dbl soak method deal i'm talking about
Pack both containers and fill one container with butane, screw together, soak, flip, soak, unscrew and filter into pan. Might be more applicable to second soaks of material.

the more and more i think about this, i just cant stop thinking about how much time is wasted... Although i only got about %11 return with my big colum setup... i sure as hell blasted 3lbs with ease... i hate wasting butane though.. so thats where this catches my interest..
 

650baquet

Active Member
Yep, i'm just waiting for Gina to get home before i run to Ace and pick up another thermos...HURRY WOMAN haha
 

650baquet

Active Member
Lol when i had some BHO dissolved in a shot glass filled with Everclear it was temping to down it haha...wonder if i'd get fucked up.
 

Guzias1

Well-Known Member
no. needs to be thc9 which is heated or decarboxylated thc. something like that.
you guys are quick on the response!

heating thc does indeed do things to you.. but! consuming it without heat also does... i lack further input, but hell, tis true!

soon enough, i will be removing the plant "waxes" and further washing out the tane, yeyyy, im not mad at all, either way, i got myself some of the strongest alcohol i ever laid eyes on...
 

vacpurge

New Member
I am very interested in the method I read in another thread here in the top of concentrates and extracts.

mixing ISO with salt, letting it settle. the salt binds with the water and settles, leaving 100% iso on top that you suck up with a turkey baster. sound interesting. not sure if it works that easy though.
 

Fadedawg

Well-Known Member
Lol when i had some BHO dissolved in a shot glass filled with Everclear it was temping to down it haha...wonder if i'd get fucked up.
Depends on how much 190 proof alcohol and how much BHO. Enough alcohol, and I can't tell whether there are head effects. It is amazing how little it takes to feel it, even if it doesn't knock one to their knees.

If the THC were not decarboxylated, it wouldn't readily pass the blood brain barrier to reach the CB1 receptors, but the CB2 and other receptors are scattered throughout the body and you would feel those effects. No oil is usually 100% carboxylic acid, so some decarboxylated THC should be present as well.
 

Guzias1

Well-Known Member
im a wee bit bored at work today.. been waiting for these bitches to hurry up and dry! rushing dont work out too well though, gahhh. chopped uhm down 4-15-13

Hope yall having a wonderful day. i need some sleeeep

notice stems on these, they got a lottt more green than the first run :p
santa cruz blues, 4th run

  • me :]










santa cruz blues, 1st run
 

650baquet

Active Member
im a wee bit bored at work today.. been waiting for these bitches to hurry up and dry! rushing dont work out too well though, gahhh. chopped uhm down 4-15-13

Hope yall having a wonderful day. i need some sleeeep

notice stems on these, they got a lottt more green than the first run :p
santa cruz blues, 4th run

  • me :]











santa cruz blues, 1st run
Wow huge difference in stem color eh?? Good work man!!! Your first run with the SCBlues looks a lot like my first run with Vanilla Kush. This next go will be my second with my current setup with

CANNA Coco line. My last go yielded way better than my very first run (3 total runs so far), but was still really fluffy and didn't taste great. It is my only heavier indica, if you have any suggest for

me in terms of what does an indica need to have different than a sativa during flower?? I'm also noticing some early yellowing of biggest leaves with my Chocolope, i know it has plenty of NPK and

correct pH if not a wee bit off 6.5-7.5. I gave it a decent dose of Earth Juice Micro recently to help, if anything it's a deficiency i believe because i'm taking it easy on her this time so i can first

see what she needs more of...first grow i went full throttle and she wasn't liking something i was giving to her but still finished great! She's way better looking this go around but not perfect!

IMG_20130423_191700_751.jpgIMG_20130423_191710_732.jpgIMG_20130423_191721_711.jpg
 

650baquet

Active Member
IMG_20130425_173226_285.jpgIMG_20130425_194442_303.jpgTotal 1.1grams, gonna lose quite a bit during winterizing i feel. Way darker than my other soaks, 2hr soak in each thermos. Total just over 2 cans of butane including a little added butane to rinse the material and thermos quickly...only reason i did this was because i felt the drops that were coming out of the thermos after the bulk butane had drained was still pretty dark and sticky. I'm not exactly stoked about my results but hey it's better than having to buy it off the street here for 50-60 per gram of oil and it's not even winterized.
Can't wait to give this shit a taste since and see how sedative the high might be, it was a mix and mingle of LCOG, TW, and BD remember.
 

Guzias1

Well-Known Member
Wow huge difference in stem color eh?? Good work man!!! Your first run with the SCBlues looks a lot like my first run with Vanilla Kush. This next go will be my second with my current setup with

CANNA Coco line. My last go yielded way better than my very first run (3 total runs so far), but was still really fluffy and didn't taste great. It is my only heavier indica, if you have any suggest for

me in terms of what does an indica need to have different than a sativa during flower?? I'm also noticing some early yellowing of biggest leaves with my Chocolope, i know it has plenty of NPK and

correct pH if not a wee bit off 6.5-7.5. I gave it a decent dose of Earth Juice Micro recently to help, if anything it's a deficiency i believe because i'm taking it easy on her this time so i can first

see what she needs more of...first grow i went full throttle and she wasn't liking something i was giving to her but still finished great! She's way better looking this go around but not perfect!

i wish i knew what the indicas liked over sativas.... im really a newbie.. my feeding schedule is pretty similar for all my strains.. i notice though, my blue she is reallyyyyy sensitive to food compared to my purple kush, and burgundy....

My PK sounds like your chocolope with lower big fan leaves just getting yellowing, shriveling early on, leaving just enough leaves it seems for the rest of the cycle..


i consistently keep my ph to about 6.3

i didnt ph my water for the very first run.. i feel ph works wonders for making nutes available. my tap water ph pushes upper 8s around here..

i went full throttle on my first grow as well. after that, i went completely opposite, didnt feed my plants shit, then i really say leaves fall off fast on all my plants, they had rough lives..

ive never grown any type of plant in my life before MJ, I hope to some day be able to fully understand the plant from root to pistil..
 
Top