MarsHydrofactory
Reaction score
5,036

Profile posts Latest activity Postings About

  • Hey mars hydro!!
    I have the sf1000 and i have been using it for a few grows now. Recently i found out that when the timerclock is in night mode the leds are still al little bit lit up. I have tried everything, buying new timerclocks, switching power outlets… Do you know how i can fix this problem. I can’t find the solution for this problem anywhere on the internet.

    i already thank you for your time

    Kind regards
    J232
    J232
    Check and make sure the hot wire is on the proper side of the plug and the outlet ground is good. Search the forums, if I remember right, the issues could be the outlets wiring or faulty grounds.
    1
    108doritos
    Its the mars hydro ts1000 ive tried everything

    i bought a spiderfarmerjust a few days agod it works fine. I dont have the same problem as with the ts1000 so i guess the mars hydro led lamp is broken!
    How is your refund service for this problem ?
    • Like
    Reactions: J232
    1
    108doritos
    Hey folks I own a MARS HYDRO FC-E6500 ,I am above satisfied with its performance.
    Would I like to win the fc4800,the fc-e4800? Yes I sure would.Both lights are top of the line ,not going to find better anywhere,I love everything about them.I would love to win either of these top of the line lights."Mars Hydro"
    You guys rock! I have had my tsw2000 vegging for a little over a month now and of the few people I have shown my setup to cant believe its only been that long. That is why I am excited to say I just pulled the trigger on the FC-4800 for my new 4x4 Gorilla tent to flower them in and excited to turn it up a notch and really let them stretch out. I'll let everyone I know about you guys who asks about what I recommend.
    Looking for recommendations on lighting/tent size. I was thinking of going with 4 tsw 3000’s in a 8x8. Seem adequate? Is there a better option that is cheaper?
    The Loafter
    The Loafter
    Watts is relative to par. 3.3 micromole/ jule is 3.3 micromole per watt.

    If what's and jules differ, feel free to tell.me idk my maths. I'd be glad to.claridy my understanding
    19-Sean-86
    19-Sean-86
    The only thing watts are relative to is power, the watts give the lights power to perform what there made to do that's it. The only reason watts are still mentioned is because the industry has built up around the watt thing for so long. Explain why a 315w CMH equals a 450w Hps? Why does and led equal a 250w hps when it's drawing 100w at the wall?
    The Loafter
    The Loafter
    Mate. Micromole/joule is pretty dam close to micromoles/watt. Fuck a plant doesn't care if we call it a micromole or a dildo... They just need power. Plants need flower power. Call it what you will. To say watts doesn't matter is quite ignorant. The photosynethic power of watts from different sources differs however that does not mean watts as a measurement is not a useful tool
    Do you have a recommendation for cooling this ts 600 there no way to cool it but blowing a fan on it thus increasing my room temps !!!
    macsnax
    macsnax
    @Rickypsimer you need better extraction it a/c buddy. Maybe a bigger extraction fan on a temp controller will do it. Idk your setup either though.
    J
    Jonny45
    My ts600 stays at a nice temp with a fan blowing at it but other than that its the only real way to "cool" it.. If you get a second check out my MARS HYDRO CUP entry with my ts600!
    HydroKid239
    HydroKid239
    Put the extraction duct right above the light with a fan blowing on the light in the direction of the duct sucking out the air/heat.
    I have 1 Mars Hydro , and a bunch of wayke me leds. Iam switching over to mars anyway. Great lights . I got all mine off amazon. gotta watch some of those Bargin lights, like the plastic ac adapter. wow. Mars is the only way to go!
  • Loading…
  • Loading…
  • Loading…
Top