howdy
, i got a cabinet thats 3 1/2ft high 2 1/2ft wide and 2 ft deep that im going to be growing in with a 250 watt hps,i will be doing a scrog grow due to height restrictions,for ventillation i will have 2 120mm hydroponic fans 1 on each side on top of the grow box to exaust hot air out,for in take fresh air i will have 2 30cm holes on front bottom of door with vents on them both,i will have a desk fan blowing between tips of plants and light,the 1 or 2 plants will be in a autopot system it has a 45ltr tub and 2 25cm pots,it automatically feeds plants when medium dries out, the growbox will be in my room where plenty of fresh air flows thru,and i got a air con to in my room, i will most likely have a mother plant under cfls in anotha closet on bottom shelf and root clones up the top, ok now a few questions,
would would i be better off just doing the 1 plant and filling the screen under the 250watt in grow box with my space? how big should my screen be? the whole length of box?if i was to do the 1 plant would i get just as much of a yield as doing 2/ does the autopot sound ok will it be good for weed?look up
www.newagehydro and look at their hydro kits autopots. does my ventillation sound ok? will 1 42 watt on top and a couple of 24watt cfls keep mother alive? hope some 1 can answer just a few of many questions i need answered,i got more questions but not enuf time i goota bail thanks in advanced
