4x4x6.5 bagseed grow!

DarthVaper84

Active Member
It’s happening! Very cool man.

Where’d you get the rocks from? If they’re from outside you should get rid of them. Might sound weird but adding things from outside where various molds, pests, etc live should be avoided.
 

Cvntcrusher

Well-Known Member
Also my clone has red new growth... pictures don't do justice.. only the new growth is red...

Could this be peroxide toxicity? A couple other plants have had new growth come in a little red and it goes away but this is the worst I've seen it. I have been a little heavy on the peroxide due to gnats.

Hope its not root rot. The plant looks very healthy they all do! 20200921_204752.jpg20200921_204744.jpg20200921_164934.jpg
 

RastaLove91

Well-Known Member
Just caught up on your grow! Super nice man, great fuckin work!!!

would you mind posting the link for the lil ac unit you got? My 2x2 tent is running a bit hot, I just put a maxsisun pb1000 in but it gets hot on full power. Also the room in it has no ac and it’s not really feasible. Also just cut a couple clones from a Bruce banner #5 that I have, which has been a rocky road. I put them directly into a FFOF, FFHF, black gold and vermiculite mix. Hoping for the best, it’s my first time trying my hand at cloning.

looking forward to the rest of this grow and your others.
 

HydroKid239

Well-Known Member
This is going to be my official grow journal. I have everything how I want it, only thing missing is my new light I'm saving for. Itll be here before flowering.
LightSched - 18/6 (thanks to you guys)
Medium - ocean forest/ store potting soil. 40/60
(Have nutes, dont need to use yet)
Temps - usually 79⁰-87⁰ depends on outside temps.
Rh - always 40% give or take.

Back in June 2020 I planted a bagseed outside and it grew for 34 days. She was BEAUTIFUL. And then my father in law destroyed her. So i invested on an inside setup. I bought a 75W blurple and a couple 23W CFLs. She started growing well indoors but i quickly learned my setup wasn't sufficient.

So I bought 2 Giixer 1000w (110W each)
4 52W CFLs.
3 mini fans.
Soil fab pots etc.

My tent has two fans exhausting the hot air. And one fan for intake has a mini AC/ humidifier in front of it.

I'll upload pictures of her from germ outside, to her temp setup, to her actual setup. I'm aware that because it's a bagseed it could be male. I just say her in Hope's itll be female. View attachment 4653388View attachment 4653389View attachment 4653390View attachment 4653391View attachment 4653392View attachment 4653393View attachment 4653394View attachment 4653395View attachment 4653396View attachment 4653397
Just got a fresh set of cfl 6500k and those clip on reflector lamps. Going to start a new grow this weekend. Good fkn job so far on this journey! Keep it up I wanna see u pull a peezy out that tent lol
 

Cvntcrusher

Well-Known Member
Just caught up on your grow! Super nice man, great fuckin work!!!

would you mind posting the link for the lil ac unit you got? My 2x2 tent is running a bit hot, I just put a maxsisun pb1000 in but it gets hot on full power. Also the room in it has no ac and it’s not really feasible. Also just cut a couple clones from a Bruce banner #5 that I have, which has been a rocky road. I put them directly into a FFOF, FFHF, black gold and vermiculite mix. Hoping for the best, it’s my first time trying my hand at cloning.

looking forward to the rest of this grow and your others.
Hey man thanks a lot for the support!

Here is the link https://www.amazon.com/dp/B08FFFD7KH/ref=cm_sw_r_other_apa_i_S2bDFbTR0E7T1
I just refill water bottles and keep them in the fridge until I turn the ac on. Then pour the cold water in.

I recently bought a bucket for $1, a 4" inline fan, and i put Styrofoam on top of the bucket and cut a hole.

2 Holes in the bucket as well for airflow.

Everyday when I turn on my lights, I put ice and water in the bucket and then I have ducting running from the inline fan attached to the bucket running into the tent.


Before I bought and attached ducting to my mini AC, I just had a fan on my intake hole, and i kept the mini AC sitting on a box blowing the cold air into the intake fan.


I hope these help you man!
 

Cvntcrusher

Well-Known Member
Just caught up on your grow! Super nice man, great fuckin work!!!

would you mind posting the link for the lil ac unit you got? My 2x2 tent is running a bit hot, I just put a maxsisun pb1000 in but it gets hot on full power. Also the room in it has no ac and it’s not really feasible. Also just cut a couple clones from a Bruce banner #5 that I have, which has been a rocky road. I put them directly into a FFOF, FFHF, black gold and vermiculite mix. Hoping for the best, it’s my first time trying my hand at cloning.

looking forward to the rest of this grow and your others.
Also, ive tried cloning multiple methods and only way ive had success is by dipping in gel, placing in a cup of water and changing the water daily. Usual root after a week or so
 

RastaLove91

Well-Known Member
Hey man thanks a lot for the support!

Here is the link https://www.amazon.com/dp/B08FFFD7KH/ref=cm_sw_r_other_apa_i_S2bDFbTR0E7T1
I just refill water bottles and keep them in the fridge until I turn the ac on. Then pour the cold water in.

I recently bought a bucket for $1, a 4" inline fan, and i put Styrofoam on top of the bucket and cut a hole.

2 Holes in the bucket as well for airflow.

Everyday when I turn on my lights, I put ice and water in the bucket and then I have ducting running from the inline fan attached to the bucket running into the tent.


Before I bought and attached ducting to my mini AC, I just had a fan on my intake hole, and i kept the mini AC sitting on a box blowing the cold air into the intake fan.


I hope these help you man!
Dope great idea. Can you share a pic of the bucket contraption? Lol it sounds like a cool idea. Thanks for sending that link, that may be perfect, cus right now it’s sitting around 82F and 90 at the lights full blast.
 

Cvntcrusher

Well-Known Member
Dope great idea. Can you share a pic of the bucket contraption? Lol it sounds like a cool idea. Thanks for sending that link, that may be perfect, cus right now it’s sitting around 82F and 90 at the lights full blast.
Yeah man let me take a couple pictures for you. I honestly would recommend the ice bucket inline fan ducting combo. Its cheap and works. My veg tent doesn't get above 84⁰ on the hottest day. Will upload in a few for ya buddy
 

Cvntcrusher

Well-Known Member
Just got a fresh set of cfl 6500k and those clip on reflector lamps. Going to start a new grow this weekend. Good fkn job so far on this journey! Keep it up I wanna see u pull a peezy out that tent lol
Man as the days go by I keep wondering what my dry yield will be, im sure ill pull a QP ez. I fucked up running 5 plants in a 32x32 never again lol
 

Cvntcrusher

Well-Known Member
Dope great idea. Can you share a pic of the bucket contraption? Lol it sounds like a cool idea. Thanks for sending that link, that may be perfect, cus right now it’s sitting around 82F and 90 at the lights full blast.
4" inline fan with ducting
Ice bucket with Styrofoam tape to the top.

2-3 holes in the bucket to pull air through.

I run the ducting from the top and blow it down that way its not at the bottom and in my way.

Works very well my friend.
 

Cvntcrusher

Well-Known Member
Just got a fresh set of cfl 6500k and those clip on reflector lamps. Going to start a new grow this weekend. Good fkn job so far on this journey! Keep it up I wanna see u pull a peezy out that tent lol
When I use my CFLs I use this setup. 8 of them usually lol and I have 3 way splitters so I can run 3 side by side by side lmao
 

Attachments

HydroKid239

Well-Known Member
When I use my CFLs I use this setup. 8 of them usually lol and I have 3 way splitters so I can run 3 side by side by side lmao
Gonna use 4 in 2-way splitters. going to sit the seeds in root riot cubes til they break out the 1st leaves. This way I can keep the bulbs over more than 1 seed. Once they show leaves I will put them into final pots (Auto's) Not gonna worry about the pot being too big because I only water seedlings around the outside perimeter of the cube so the roots have to stretch out to the moisture.
 
Top