800 watt bridgelux outdoor floodlights grow

I've been confusing highbay lighting and with stadium lighting. Stadium lighting is what this 500w unit is. I will check if the XB-D's are available. I am also looking to have a wider square hood/reflector made with removable glass. Would also like to have it dimmable. I may have found someone that is willing to buy and test this light.
 
Would you buy a street light from a Hydrostore?:mrgreen: You're still talking 300 watts range. I need a single unit that can replace a 1000w over a 4'x4' tray. I'm looking at the 200w unit I have now for the personal grower that might add more later. The stadium lights I think could be a direct replacement for the 1000w users with 10 light rooms. I just need to have the cone/reflector redesigned. Any other input on design is appriciated. What ratios of the 3 color temps would you prefer?
 
If the light proves itself, it will be sold through a couple stores in the SF bay area. I am putting 10 sour D's under the lights right now to start flowering.
 
I ended up getting 10 of his smallest plants (sourD). I'm not to sure how high to set the lights, but for now they are angle inward and 12" to 16" off the canopy.
IMG_20140606_020004_232_zps3259cb09.jpg

Only one 200w light is on in this picture.
IMG_20140606_023256_940_zpsd4cc9f35.jpg
 
Can't do the XB-D's, still not sure on the 3020's. I will be able to make it dimmable for only $15 more. Still working on what to do about that useless reflector. It can be remove, so looking at the reflector from there square single COB flood lights.
 
Looking good man, subbed. I have no idea what all the lighting lingo means, are they led bulbs? I'm intrigued
 
They are COB's leds. 2 200w lights over each tray. The COB's are the larger high power leds everyone is using for their DIY home grows. My lights are meant to be outdoor floodlights, but so far are looking great.
 
Destriptions
1
SEM-FL500-02B (CE/ROHS/IEC)
LED FLOOD LIGHT ◆Power:500W ◆Input Voltage: AC100-277V,50/60HZ ◆Driver brand:Meanwell ◆LED:CREE SMD2525 XBD series ◆LED quantity:288pcs ◆Power factor:>0.95 ◆THD<15% ◆Lifespan:>50000 Hours ◆Luminous Flux:45000- 50000 lm ◆Beam Angle:90° ◆Blended spectrum (50% WW, 30% NW, and 20% PW) ◆Dimmable ◆Material:aluminium alloy ◆Dimension:374*374*448mm ◆Protection Level:IP67 ◆Casing Color: black ◆Cable:3*1mm² rubber covered wire ◆Replace 1500- 2000w HPS
Here's the specs. on the stadium lights I will be testing next. They have changed a few things for me. I will be receiving it in less than 2 weeks. Still need to get some plants to test under this light.
 
I'm still planning on taking this light to Bridgelux to get their opinion on the light. I would like to have a list of questions to ask their techs. Please throw out any questions you would like answered. This if for the 200w light.
 
Just made a call to Bridgelux and we should be setting up a meeting to look over the light. I should be able to answer any questions you have.
Stardust- The drivers will not allow the surge to one COB if the other goes out. Matthew @ Bridgelux confirmed that the meanwell driver will prevent that.

NOW IS THE TIME TO ASK QUESTIONS!
 
Thursday I am going over to Bridgelux to have the light checked out by their techs. Everyone that was questioning China's build quality or build design, now's your chance to get accurate answers.

I'm talking to:
PSUAGRO
SUPRASPL
STARDUSTSAILOR
MRFLUX
CHRONIKOOL


my online brain pool:bigjoint:
 
Back
Top