A little advise please

Help needed with drivers. I have two meanwell HLG 320H C2100B DRIVERS. HOW MANY VERO 29 G7 can I run on them. Responses with explanations would be greatly appreciated.

Driver data sheet - http://www.mouser.com/ds/2/260/meanwell_HLG-320H-C-spec-914652.pdf

Vero data sheet -http://www.bridgelux.com/sites/default/files/resource_media/Bridgelux DS93 Vero 29 Gen 7 Array Data Sheet 20170308 Rev J.pdf

A Vero 29 should pull 38.7v @ 2100ma. You do the math.

You have a range of options. One driver will light 3 cobs wired in series which is running them pretty hard. You might get away with running 4 cobs wired in series, it's close to the max voltage of the driver (152 volts).

Another option is to run two parallel strings of 3 (or 4) cobs per driver, which will make it easier to control the heat put out by the cobs, and result in a better light spread and greater efficiency in turning electricity into useable light.

Two drivers and 12 (or 16) cobs would do very well in illuminating a ~20 sq. ft. space.

depends which voltage chip you use- B,C, or D