aeroponic diy system ez clone sprayer help

I ordered a batch of EZ clone sprayers in order to make my own aeroponics system. I have my pump connected to PVC pipe and plan to hook up the EZ clone sprayers to the PVC pipe.

The big question is what's the best way to connect the sprayers to the PVC? I want them to be removable in the likelihood of them clogging. I have been prototyping and I currently have a 3/16" hole drilled in the PVC and screwed the EZ clone sprayer in. only problem with this is they leak out the base.

before i start trying all kinds of thing I thought I'd ask here if anyone has a solution. I've thought about using rubber grommets, gluing 3/16th flex tubing to the PVC and screwing in the EZ clone sprayers to that or trying to thread the PVC and use teflon tape but i don't know the thread pitch of these sprayers.

I tried searching and found nothing about the EZ clone sprayers. I'll post pics of my build tomorrow i left my camera at work.

Use an 11/64 bit, no leaks.

When you screw them in I like to use a scrocket ( at least I think those things are called scrockets, if not they should be) because it hurts my finger if I got a bunch.

The threads on the EZ-clone sprayers exactly match the 10-32 tap size. You can use a #21 drill bit for your pilot hole. BTW, this is NOT the same as 10/32" bit.

I also used an 11/64 drill bit and have no leaks