swiss connection2
New Member
i put this thread here
It is difficult forme to post pictures, because I have an iPhone and even if I deletethe characteristics of photos ( geotagging and others), in Europe itis dangerous and I do not trust . Therefore I prefer to resize Paintand Share Tor in a cybercofee. it's boring . Here is a picture of budsativa harvested 9semaines instead of 13/14 weeks provided . I hadnot planned on a trip a few months but it was really great .
he is one of 28species of flowering sativa short I tested 2 x28 clones.
20 were like this ,a little smaller 20 and 16 a little smaller .
Too bad, but hey Ihad missed , difficult lowered humidity and even looked like acoconut on watering and the time .I did not have much time to takecare of me compared to now . And even my cat catch my exhaust severaltimes ( but I killed him ahhaha )
Now 18 seedsgerminated well on Crytical + , well grown . I cut the first clonesof each mother plants , the roots of clones are output . I put in12/12 to find females and select the best mother plant , there is onethat stands out from the crowd.
I cut the first 50cuttings from clones reported sex and they go in and aa hpa aftercloning . Root rooms are completed. I hesitate on some hardware.
I keep a motherplant of Crytical for mass in 8 weeks I raise clones with the samematerial but instead of root room I put tubes 3.5 inch and 7 inchdiameter to see the differences with the root rooms.
Sativa seeds 2 xQueens mother reggae strombery delicatessen given test are alreadyvery large, they are part of the vertical hps scrog of 2x600W 7 feethigh .i had founb a cool tube 6 feet
i'll take two clonesfor the second vertical scrog in LED .
It is composed ofsix rules aluminum 10 feet ( DIY store to dissipate heat). I placedthe LED in order to have the equivalent of 1000w Circular led to 5feet tall .
The LED are powered2w 3w for warmth. They are created from Luxeon and philips .
I is divided intoseveral panels ( ABCDEFG ...... ° :
Have thecorresponding number of drivers for LED
Have the spectrumand the growth of flowering
Lighter panels tothe growth (saves electricity and heat , it heats with these LED )
Panels under lightsby micro controler crouzet millenium connects drivers on each (depending on the width and height of the plant and whether growing orflowering) .
Fornow I have only 5 foot panels on each side because the LEDs areexpensive and even if it is not my first LED panels I do. I prefer tobe vigilant on the spectrum c is evident ever there at all andanything.
I would order otherLED if the panel works well and if the other vertical hps scrog notreally a problem .
It is difficult forme to post pictures, because I have an iPhone and even if I deletethe characteristics of photos ( geotagging and others), in Europe itis dangerous and I do not trust . Therefore I prefer to resize Paintand Share Tor in a cybercofee. it's boring . Here is a picture of budsativa harvested 9semaines instead of 13/14 weeks provided . I hadnot planned on a trip a few months but it was really great .
he is one of 28species of flowering sativa short I tested 2 x28 clones.
20 were like this ,a little smaller 20 and 16 a little smaller .
Too bad, but hey Ihad missed , difficult lowered humidity and even looked like acoconut on watering and the time .I did not have much time to takecare of me compared to now . And even my cat catch my exhaust severaltimes ( but I killed him ahhaha )
Now 18 seedsgerminated well on Crytical + , well grown . I cut the first clonesof each mother plants , the roots of clones are output . I put in12/12 to find females and select the best mother plant , there is onethat stands out from the crowd.
I cut the first 50cuttings from clones reported sex and they go in and aa hpa aftercloning . Root rooms are completed. I hesitate on some hardware.
I keep a motherplant of Crytical for mass in 8 weeks I raise clones with the samematerial but instead of root room I put tubes 3.5 inch and 7 inchdiameter to see the differences with the root rooms.
Sativa seeds 2 xQueens mother reggae strombery delicatessen given test are alreadyvery large, they are part of the vertical hps scrog of 2x600W 7 feethigh .i had founb a cool tube 6 feet
i'll take two clonesfor the second vertical scrog in LED .
It is composed ofsix rules aluminum 10 feet ( DIY store to dissipate heat). I placedthe LED in order to have the equivalent of 1000w Circular led to 5feet tall .
The LED are powered2w 3w for warmth. They are created from Luxeon and philips .
I is divided intoseveral panels ( ABCDEFG ...... ° :
Have thecorresponding number of drivers for LED
Have the spectrumand the growth of flowering
Lighter panels tothe growth (saves electricity and heat , it heats with these LED )
Panels under lightsby micro controler crouzet millenium connects drivers on each (depending on the width and height of the plant and whether growing orflowering) .
Fornow I have only 5 foot panels on each side because the LEDs areexpensive and even if it is not my first LED panels I do. I prefer tobe vigilant on the spectrum c is evident ever there at all andanything.
I would order otherLED if the panel works well and if the other vertical hps scrog notreally a problem .
