Angles everywhere

buysser

Member
Just finishing up this attic grow room and need to start thinking about how in the world I'm going to hang lights from what angle. Tossing it out there with dimensions to see if anyone can lend a hand. I plan on going LED for sure to help with heat..
Thanks!!
 

Attachments

  • Room dimensions.jpg
    Room dimensions.jpg
    368.1 KB · Views: 94
where do you live? attic grows are a constant battle with heat. Complete pain, I did it for 3 yrs and it was always a problem, and that was in santa cruz with average outside temps in the low 80's. If it's all you got, I understand, as I've been there, but since choosing a spot is so crucial, i'd recommend a lower spot in your house if at all possible.
granted that wasn't your question, so pardon me if i'm being difficult
 
I know on the nails. I've met a few unfriendly two by fours in the last couple months.
I did my best to try to move it to another area in the house but the wife said absolutely not so I took this is my last resort.
I've got it super insulated on the outside, half inch plywood and the inside I've got reflictix and I'm putting in a combination air conditioner heater and dehumidifier plus i have a five foot run venting from a room in our house which is kept at constant 73. I think my battle is for those last few degrees and the humidity here in a very humid state. I think... ? Thanks for the responses!!
Peace

Sent from my SCH-I535 using Rollitup mobile app
 
I know on the nails. I've met a few unfriendly two by fours in the last couple months.
I did my best to try to move it to another area in the house but the wife said absolutely not so I took this is my last resort.
I've got it super insulated on the outside, half inch plywood and the inside I've got reflictix and I'm putting in a combination air conditioner heater and dehumidifier plus i have a five foot run venting from a room in our house which is kept at constant 73. I think my battle is for those last few degrees and the humidity here in a very humid state. I think... ? Thanks for the responses!!
Peace

Sent from my SCH-I535 using Rollitup mobile app
sounds like youll do fine at least u have a plan which is more than most
 
Hope so flower.. Thanks! Been waiting for a long time to do this. Career, kids thru college and married, wife finally convinced. Just plain nice. :-)

Sent from my SCH-I535 using Rollitup mobile app
 
thats funny almost mirror here waited until youngest was out.yeah very nerve wracking at first but youll do fine,enjoy!
 
thats funny almost mirror here waited until youngest was out.yeah very nerve wracking at first but youll do fine,enjoy!
That is funny..
I always smile when I see them walking right under the attic door. If they only knew (and they won't). There's a lot of pent up growing ambition fixing to burst forth... :-)
 
I think LED side lighting on the angled walls would look really nice and neat. Would give you the maximum overhead space for your plant canopy.
 
Hi Leaf Chief!
It looks like that's the plan. Manufacturer suggested two LEDS above growing area and two smaller LEDS on each angled side wall helping with area that isn't hit with overheads. My plan on my first grow is to grow small and wide with maybe only two plants at first then assess from there. I do have the height in the center to play with non scrog also.
At one time I had thought about the sides being totally separate growing areas. Someday once I really understand my room and lighting.
Thanks for the response Leaf and flower!! Our time has come!
You guys are awesome!
peace
 
Awesome, really can't wait too see how it looks with the lights set up and configured. Any idea what strain you will be running?
 
I know me neither, been a real labor of love and am taking my time to try and do it as right as I can considering its in the attic. On the strain, I think maybe white widow but haven't completely decided yet. The criteria will be; easy to grow, not so stretchy with a quick growing time and a pleasant punch. Hardly anything more painful then buying overpriced pleasure that's poor quality in my parts when the fix is right above my head...
Patience is going to be a real challenge. :-)
 
I've been thinking about that flower. My plan is a nice easy first grow with delicate scrog training and then go from there. I'm going to figure out how to make the side lights movable so I can position them for best canopy penetration with horizontal or vertical. I want something that practically tells me when to water her so I can get my confidence moving forward and then we play! Besides, I need some stash to help with this lifetime project.
 
I know me neither, been a real labor of love and am taking my time to try and do it as right as I can considering its in the attic. On the strain, I think maybe white widow but haven't completely decided yet. The criteria will be; easy to grow, not so stretchy with a quick growing time and a pleasant punch. Hardly anything more painful then buying overpriced pleasure that's poor quality in my parts when the fix is right above my head...
Patience is going to be a real challenge. :-)

Ahh, White Widow is a great strain for sure. Northern Lights may be up your ally too!
 
I did look at that strain also. I like some of the characteristics of Northern lights. Pretty much a flip of the coin for me. Just picking one this time so I have good comparisons rather then trying to figure out what each one should be doing.... ? I built a little cloning station in my room for the children and our future! :-)
 
I am not sure what the best way to hang is. The A51s that I just got have a hanger kit, then you just need some eye hooks
deluxe_hanging_kit.jpg



Very clean area so far.
I would look into mainlining if you want to stay low. NugBuckets has a thread on RUI

https://www.rollitup.org/t/the-main-lining-thread.542308/

this write up is a little easier to read

http://www.growweedeasy.com/main-lining-technique-nugbuckets
 
Thanks Commander,
Trying to keep it clean from cords, hanging vent hose and most of all the noise level. My exhaust will be just outside the room in a sound proof box sucking out of six inch vent on ceiling of room. We'll have to see how that works.. :-)
I think side hanging will be from two hooks on an end of the panel (I have looked at bicycle pulley systems) and the angle would be controlled by a guide wire attached to a hook set up down the side of the wall. That way it can travel up and down and you can set the angle with some cord. I think at least.. :-)
Thanks for the articles, I have them saved already....
 
Back
Top