Another shitty ViparSpectra grow

Xcoregamerskillz

Well-Known Member
Ok, here's a question. I can get 288V2 boards for under 50 bucks on Alibaba. The vendor has been used by forum members here and seems reputable. Should I get 10 of those (5 per tent) or get the strips? The second issue would be sourcing heatsinks for the 288v2s if I go that way. Thoughts?
 

Army13p23

Member
I bought 4 288v2 3000k and love them I bought everything separate and built them myself. First led grow with them so far so good I would highly recommend them.

Making my roots grow like crazy
 

Attachments

mathed

Well-Known Member
My vipars have always done great, but I can’t wait to see what my QBs harvest.
I know, that's what I have and compared to HPS, these little guys kick ass. I don't understand the hate they get...they are cheap but they get it done. Some of my pals were blown away at the quality of the flowers, I stand behind them for sure.
 

blowincherrypie

Well-Known Member
I max the shit out of everything I make, so I'm def gonna go with heatsinks.

:clap:
You dont have to "max the shit out of" strips though.. It's one of the advantages. You're literally just burning your shit out when u crank them up.. Get more strips and run them a little softer.

Those v2-96's look pretty good from hlg.. May be something to look into

I know, that's what I have and compared to HPS, these little guys kick ass. I don't understand the hate they get...they are cheap but they get it done. Some of my pals were blown away at the quality of the flowers, I stand behind them for sure.
lol.. in what way?
 

Army13p23

Member
I am looking into getting a few v2 96 my buddy has them and loves them. I think I will just get two for now but will eventually get 6 total
 

Xcoregamerskillz

Well-Known Member
You're still talking probably 5 for a 4x4. That 500 USD plus driver. Probably going to go and get 8 QB 288 V2. Either 50 bucks each sans heatsink (5 flower, 3 veg) and add 2 to the veg room after (for flexibility) or 60-65 from Atreum's eBay page (they've accepted similar offers in the past) either that or Luminous CXM22 COBs. 5 of those are 110(plus heatsink) on cobkits. Just realised the citiczen CLUO48-1212 are on sale for like 11 bucks.... Might grab those.
 
Last edited:

blowincherrypie

Well-Known Member
You're still talking probably 5 for a 4x4. That 500 USD plus driver. Probably going to go and get 8 QB 288 V2. Either 50 bucks each sans heatsink (5 flower, 3 veg) and add 2 to the veg room after (for flexibility) or 60-65 from Atreum's eBay page (they've accepted similar offers in the past) either that or Luminous CXM22 COBs. 5 of those are 110(plus heatsink) on cobkits. Just realised the citiczen CLUO48-1212 are on sale for like 11 bucks.... Might grab those.
ya if you can get the 288 for 50 a piece that's the way to go.. you could easily get by with 4 of the 96's in the 4x4.. good luck
 

Xcoregamerskillz

Well-Known Member
ya if you can get the 288 for 50 a piece that's the way to go.. you could easily get by with 4 of the 96's in the 4x4.. good luck
Thanks. Still not sure what I'm going to do. It's a huge investment for a noob, but I think it will be worth it. I was trying to get away with a 500 budget for 2 rooms. We shall see. Those $11 cobs are tempting.
 

blowincherrypie

Well-Known Member
Thanks. Still not sure what I'm going to do. It's a huge investment for a noob, but I think it will be worth it. I was trying to get away with a 500 budget for 2 rooms. We shall see. Those $11 cobs are tempting.
A 315 wont quite have a 4x4 pumping but it would provide a good start.. You can veg in a small tent with <200w.. cobs and leds are great especially for vegging with minimal watts but I used to like my 315 especially in the winter months
 

Xcoregamerskillz

Well-Known Member
18 of those Citizen cobs with heatsinks could run 1 veg and 1 flower room easy (12 in flower, 6 in veg). But that's 468 USD before drivers, wires, etc.
 

Zogs

Well-Known Member
Maybe I'm confused , but 18 cobs for a 4x4 ? I think you are underestimating cob power. I would think 6, 54 watt cobs in a 4x4 would be maximum plants could handle.
 

mathed

Well-Known Member
You dont have to "max the shit out of" strips though.. It's one of the advantages. You're literally just burning your shit out when u crank them up.. Get more strips and run them a little softer.

Those v2-96's look pretty good from hlg.. May be something to look into



lol.. in what way?
They don't create nearly the same heat which normally wouldn't be an issue but my space is tight and I don't want to scorch the ladies in the summer. The energy consumption is less as well, plus I don't have the bulky ballasts to deal with or have to hear the loud humming noise all the time. Now, I did get a larger yield from the HPS on a per plant basis but in terms of quality, I've found the results to be comparable. Since the space I'm using is small anyways, the ladies have to be kinda short and my main concern isn't so much yield as it is quality. If I were in a different setting and my goal was something more aligned with the results of a commercial op, then maybe I might be thinking differently but for my needs, the LEDs are more appropriate imo. I definitely don't want to make it sound like HPS is not good as they are certainly the standard, however the LED production has both surprised and impressed me thus far.
 

Xcoregamerskillz

Well-Known Member
Maybe I'm confused , but 18 cobs for a 4x4 ? I think you are underestimating cob power. I would think 6, 54 watt cobs in a 4x4 would be maximum plants could handle.
12 in flower. I've been asking around, too, and you can run more a bit dimmer for better light spread.
 

blowincherrypie

Well-Known Member
They don't create nearly the same heat which normally wouldn't be an issue but my space is tight and I don't want to scorch the ladies in the summer. The energy consumption is less as well, plus I don't have the bulky ballasts to deal with or have to hear the loud humming noise all the time. Now, I did get a larger yield from the HPS on a per plant basis but in terms of quality, I've found the results to be comparable. Since the space I'm using is small anyways, the ladies have to be kinda short and my main concern isn't so much yield as it is quality. If I were in a different setting and my goal was something more aligned with the results of a commercial op, then maybe I might be thinking differently but for my needs, the LEDs are more appropriate imo. I definitely don't want to make it sound like HPS is not good as they are certainly the standard, however the LED production has both surprised and impressed me thus far.
ok if you got a larger yield and "comparable" quality with HPS why would you say

..compared to HPS, these little guys kick ass...
Im not hating I'm just trying to figure out what youre talking about.. If you're saying theyre convenient for growing a plant or two, I could understand that. I just dont think a vipar is kicking a comparable wattage HPS ass.. maybe they do wtf do i know
 

Serverchris

Well-Known Member
Ok, here's a question. I can get 288V2 boards for under 50 bucks on Alibaba. The vendor has been used by forum members here and seems reputable. Should I get 10 of those (5 per tent) or get the strips? The second issue would be sourcing heatsinks for the 288v2s if I go that way. Thoughts?
I would get the strips from digikey then you know you have legit samsung diodes and not some Chinese junk, also better coverage with the strips.
 

Zogs

Well-Known Member
12 in flower. I've been asking around, too, and you can run more a bit dimmer for better light spread.
One of us is out to lunch lol .. I've been following a lot of cob grows and the girls don't seem to like more than 1 cob per plant. In a 4x4 I think you are maxing out at 6 plants in 5 gal pots without over crowding. I concede however I may be off with 6 plants. But I think that would be a good plant count with a 4x4.
 
Top