I’ve been reading and reading for a few weeks prepping for a purchase but there is one thing that throws me off. Looking at the Vero29 c se. this cob has a vf of 69v or somewhere close to that. CREEs are 36ish.
This confuses me because on a lot of builds Veros are referred to as ‘Vero29 se 36v’. A lot of times when folks list their parts.
Where are people getting 36 from on a C Vero?
if I wanted to run 3 of the 29 c se’s @ 1140 mah they would pull about 68v yielding about 77w each. Which means my driver would need to handle 68x3 volts. Do I have this right?
I ask because if someone were to use 36v on the Vero to size a driver to run several it seems like a mistake is looming.
Am I totally off the mark here?
This confuses me because on a lot of builds Veros are referred to as ‘Vero29 se 36v’. A lot of times when folks list their parts.
Where are people getting 36 from on a C Vero?
if I wanted to run 3 of the 29 c se’s @ 1140 mah they would pull about 68v yielding about 77w each. Which means my driver would need to handle 68x3 volts. Do I have this right?
I ask because if someone were to use 36v on the Vero to size a driver to run several it seems like a mistake is looming.
Am I totally off the mark here?
