Blue OG, Purple Deisel, TrainWreck, Simple DWC.

Stevieh

Well-Known Member
IMO I would start defoliating the train wreck as well ...... I would actually trim them all :)
I took 2 nuggets off the bottom branches of the train wreck last night and dried in the microwave ..... Smoked a joint ... I was drunk but I ended up tripping nearly strong stuff that already :)
 

NrthrnMichigan

Well-Known Member
Grey Mold....About 10 days ago I noticed a white powdery substance on some of my lower fan leafs.
I thought... either these girls are partying without me or maybe it was a residue from my humidifier. The water here is a hard water.

Last nite I noticed that the white powder had turned grey and I found more of it.

The conditions I've created to keep the nodes tighter and stretch to a minimum during the first 2 weeks of flower with the lower temps and humidity between 50-60% has been a perfect environment for "BOTRYTIS" aka Gray Mold. After more research (3 diff grow bibles and a friend with many years of experience) I came to the conclusion that this is what I have happening inside my tent.

I've cut the rh down to 40% and will be using a sulphur burner or vape for the next few days during lights off.
This should work.
I'm lucky that no buds are involved.

I will still keep the temps on the low side in keeping with my original plan.

Sorry no pics .. riu is having problems again?

I've done ok without the "likes" not working but not being able to view or display pics on this forum makes me think that this is NOT a very good website for doing journals. I may have to go back to pen and paper.

For what it's worth,
Just my .02
 

Stevieh

Well-Known Member
M8 I am sorry to hear that your girls where partying without you ...... I might of been involved in that, but you can't blame them....
i will take the blame .... But I want to see the pics of the party ^;)
 

Critcat

Member
Cool stuff man, looking at that blue OG closely,got a few fems. What is up with the no like buttons?

Well I "like" all above!
 

NrthrnMichigan

Well-Known Member
Gray Mold... I've been using a Sulfur vaporizer during lights out and decreased the humidity to 45% in hopes of getting this mold under control. I defoiliated a couple pounds of mold covered fan leaves and while I was at it I thinned out the future popcorn and sucker leads.
 

Attachments

NrthrnMichigan

Well-Known Member
Mold is under control after 3 night's of the sulfur vape. I'll figure out a wash for them this weekend.

Everything else is perfect:
Temps: day 72-75°
Night 62-65°
Water 62-65° ph. 5.8 very little swings during top off .1
Rh 41-44%
Still a minimal stretch going. I hope I don't run out of room...
 

Attachments

Top