Club 600 Breeding Showcase

DST

Well-Known Member
Ps nice lookin male D!.....how do you collect your pollen mate?
When the male starts to mature and flowers start to open I just snip them off into a container or jar. Then when the male is really starting to burst I snip a top off, hang it upside down in a bag and let the flowers open and release their pollen into the bag. Various ways to do it, just make sure you do it away from your other plants!
 

DST

Well-Known Member
So just wanted to show you the process for Feminised seeds. There have been a few posts that I have seen about making Colloidal Silver but not seen pics, so I have put a few together over the last few weeks as I prep up a DOG for some weird shexy action.

This is a previous pic from last year but will give you the idea of the set up.

Most importantly you need to make sure your 3 x 9v batteries are set up as in the pic and not just connected in a line, otherwise the charge will not be sufficient.


You can see the reaction starting. For the best results do this process overnight in a dark place (i put it inside a cardboard box). 24 hours later you get a solution that should contain enough ppms for you to work the magic. You can also make yellow silver by slowly applying heat to the water but this is not necessary imo.


You can end up with some scum on the silver rods, I just made sure I kept this out of the solution I was putting into the spray bottle.


Now comes the frustrating part. WAITING!!!!!!! The process takes around 10-14days for you to see the sex changing. I used a small clone as I don't see the point in reversing a huge mofo plant.

Basically before putting the plant in the 12/12 cab I soaked with the silver solution, then on a daily basis for a about a week I kept giving the plant a soaking.

Once pistils has started forming I laid back on the spray and for the last week have let it be. The sacs can be seen in the pics below.





Will update further as the process continues.

Peace,

DST
 

PUKKA BUD

Well-Known Member
still loving the coco.. hating the handwatering though ;) lol
trying to get a kinda drain to waste thing going at the moment.. sick and tired of lugging them between the tent and the bath
Haha i hear mate thats the only thing that screws my nut too, ive been lookin at dripper sytems, thinkin about goin with 3L airpots doin 4 plants at a time drippers to waste twice a day in flower see how that pans out. good luck dtw thing mate!

Glad to see you around buddy!!!
Hi bill cheers matey!! whats up with your thread?????..............got some of each my crossers comin your way bro, gunna dweze for ya.

To quote a film i should be ashamed of loving, "frost yourself" :lol: Looking um, pukka...
Nice 1 tip top!!.....what films this then geezer?? lol

Grapechosis! ;)
I like i like lol!!!.........keep um comin mate lol

psycho-rape
Now that shits just wrong mate lmao!!!

Nice work Pukka!

Let the fun with the names begin, lmao,

grape rape....
Cheers matey!! im real happy with my 1st attempt!..........................ya both wrong uns!! lol

When the male starts to mature and flowers start to open I just snip them off into a container or jar. Then when the male is really starting to burst I snip a top off, hang it upside down in a bag and let the flowers open and release their pollen into the bag. Various ways to do it, just make sure you do it away from your other plants!
Thanks for that D, i tried to let the flowers open an thgought id be able to collect the pollen from the bottom of the box but he was so bushy just stuck allover the leafs managed to salvage a little but wasted loads, after that i went round with piece of card tappin the open flowers on to it but that was a pain in the arse so ended up choppin the nearly open pods off after that an lettin um dry then sieving the pollen out which dint work bad but still felt like i wasted some, think ill give choppin the branches off an bag um like you said ago next time,................. so do the flowers still do there thing once chopped from the plant?? i thought maybe they'd stop with no water an what not gettin to them? wierd init.
 

PUKKA BUD

Well-Known Member
So just wanted to show you the process for Feminised seeds. There have been a few posts that I have seen about making Colloidal Silver but not seen pics, so I have put a few together over the last few weeks as I prep up a DOG for some weird shexy action.

This is a previous pic from last year but will give you the idea of the set up.

Most importantly you need to make sure your 3 x 9v batteries are set up as in the pic and not just connected in a line, otherwise the charge will not be sufficient.


You can see the reaction starting. For the best results do this process overnight in a dark place (i put it inside a cardboard box). 24 hours later you get a solution that should contain enough ppms for you to work the magic. You can also make yellow silver by slowly applying heat to the water but this is not necessary imo.


You can end up with some scum on the silver rods, I just made sure I kept this out of the solution I was putting into the spray bottle.


Now comes the frustrating part. WAITING!!!!!!! The process takes around 10-14days for you to see the sex changing. I used a small clone as I don't see the point in reversing a huge mofo plant.

Basically before putting the plant in the 12/12 cab I soaked with the silver solution, then on a daily basis for a about a week I kept giving the plant a soaking.

Once pistils has started forming I laid back on the spray and for the last week have let it be. The sacs can be seen in the pics below.





Will update further as the process continues.

Peace,

DST
Nice post D, dweze has been usin the silver spray over at his place an makin fem seeds for abit now an ive read up on it from some of his info an sounded cool was gunna have ago myself in the future, dweze bought his silver spray tho an did the kinda same thing as you sprayin wise, i looked into makin my own there was some guids in his info but no pics so that post helps alot mate cheers, also the guides i seen showed you how to do it with a old 9V phone charger or something simular plugged into the mains your way seems safer if your no good with electrics.
 

DST

Well-Known Member
I have done a few silly things with 9v chargers, and it always ended up with sparks and the house shorting, lol....I agree, batteries are much easier, lol.
 

Shwagbag

Well-Known Member
Nice DST! What is the tool with the attached steel rods that allows the connection to the power source referred to as? Would like to try this at some point.
 

tip top toker

Well-Known Member
It's just a connector strip as light be used in home wiring or speaker cable etc. In no way essential, just makes things a bit easier, you could use bluetack if you really wanted.
 

DST

Well-Known Member
PArtly true TTT, I am no electrician but the connector strip also has a little cathode gromit attached to it (as I say cathode gromit is about as descriptive as i ca get).

I'll try and get a pic....
 

Shwagbag

Well-Known Member
Thanks guys, very cool, I love the DIY mentality here lol. Why pay top dollar for CS when you can roast one and make your own at home! Cheap and productive entertainment haha.
 

DST

Well-Known Member
My kit is sold by a Dutch guy online, but it's the silver you pay for....with what I have I can make gallons and gallons of colloidal silver so I thought it a no brainer. But the pieace of kit to make it costs about 1 euro, lol...
 

Shwagbag

Well-Known Member
LOL thats cool with me, I'd gladly pay 10 for the convenience of having everything I need all at once shipped to me.... WIth 9 volt batteries lol.
 

DST

Well-Known Member
I am a bit suspect about the bought CS. I checked it out and just kept reading that the ppm's were not high enough for working with plants. Perhaps you can buy stonger versions though.
 

Shwagbag

Well-Known Member
I am a bit suspect about the bought CS. I checked it out and just kept reading that the ppm's were not high enough for working with plants. Perhaps you can buy stonger versions though.
Yeah that makes sense. Can you use a tds meter to gauge the strength of the CS solution you're making? The stuff I've seen at health food stores is between 10-30 ppm. Does this mean feminized DOG is coming?

The CS kits are going for 60-200 bucks online lol. Damn!
 

DST

Well-Known Member
Yup, it's for some fem dogs.

My kit and silver was 35 euro, plus 5 euro postal. I just checked and the site is no longer showing the page you can buy the CS from.....


Yeah that makes sense. Can you use a tds meter to gauge the strength of the CS solution you're making? The stuff I've seen at health food stores is between 10-30 ppm. Does this mean feminized DOG is coming?

The CS kits are going for 60-200 bucks online lol. Damn!
 

DST

Well-Known Member
Update of the Reversed DOG. Flowers look like they are about to pop.....


Peace,

DST

So just wanted to show you the process for Feminised seeds. There have been a few posts that I have seen about making Colloidal Silver but not seen pics, so I have put a few together over the last few weeks as I prep up a DOG for some weird shexy action.

This is a previous pic from last year but will give you the idea of the set up.

Most importantly you need to make sure your 3 x 9v batteries are set up as in the pic and not just connected in a line, otherwise the charge will not be sufficient.


You can see the reaction starting. For the best results do this process overnight in a dark place (i put it inside a cardboard box). 24 hours later you get a solution that should contain enough ppms for you to work the magic. You can also make yellow silver by slowly applying heat to the water but this is not necessary imo.


You can end up with some scum on the silver rods, I just made sure I kept this out of the solution I was putting into the spray bottle.


Now comes the frustrating part. WAITING!!!!!!! The process takes around 10-14days for you to see the sex changing. I used a small clone as I don't see the point in reversing a huge mofo plant.

Basically before putting the plant in the 12/12 cab I soaked with the silver solution, then on a daily basis for a about a week I kept giving the plant a soaking.

Once pistils has started forming I laid back on the spray and for the last week have let it be. The sacs can be seen in the pics below.





Will update further as the process continues.

Peace,

DST
 

bongbang

Active Member
Hey DST, thanks for your precious post. I'm a little misunderstood (because of my bad Engrish :( )
1-After making that water and spraying it on a male plant, the plant will turn into a female plant? Won't be there a decrease in the % of thc?
2-And I read in your post that this is a trick to get feminised seeds? So after soaking the male plant with silver solution, the plant will produce feminised seeds?

Sorry if the questions are silly. I'm in my first grow :p
 
  • Like
Reactions: DST
Top