DIY Aero Clone link

havocdb

havocdb

Well-Known Member
Just in case people are looking for something like this:

DIY EZ CLONER/ Aero+DWC BOX

I'm currently building a mini version of this to prove I can clone a local blueberry bush. So far, nobody has been able to get clones to root. Suckers only try it while the bush is fruiting. Retards...

Anyhow, throw an airstone on the bottom and you've got a hybrid Aero+DWC, or add a drain separate res for straight aero...

Tips for people without hydro shops: you can just use pipe insulation instead of the neoprene pucks if you don't have access to a hydro store. I found similar misters to these at home despot in the drip irrigation section by the sprinklers. made by a company called Raindrip.
 
Last edited:
havocdb

havocdb

Well-Known Member
got all the pieces today...
so far this has cost me less than 35 bucks:


2x sterilite plastic bins from 99 Cent Store- 1.98
3x assorted 1/2 inch pvc with threaded ends (8",6", 4")- 5.00
2x threaded endcaps- 1.50
1x 1/2 "T" fitting - 0.95
6x neoprene pucks for EZ Clone- 3.00
6x 360 nozzles for EZ Clone - 3.90
*1x powerhead pump (leftover res pump) -15.00 (when i bought it)
31.33
02.43+ tax
-----
33.76 total

I swooped up the EZ Clone parts from the local hydro shop cuz the dude was really cool, and the sprayers looked less prone to clogging than the ones from home depot. The pucks could easily be replaced by pipe insulation from home depot, but the pucks are uniform sizes, and I'm a lazy bastard.

I'm gonna do a not so dry run tonight to see how things work. If it pans out, I'll take pics of the reassembly and add instructions tomorrow after my cam batteries charge.
 
You must log in or register to reply here.
Top