Dmt

floridasucks

floridasucks

Well-Known Member
when u put it to freeze make sure the naphtha turns milky when u blow on it. cover with plastic wrap put it in the fridge for an hour then into the freezer.

dont use the hot plate, u want to evap and cool it as slow as possible.
 
ndangerspecimen101

ndangerspecimen101

Well-Known Member
floridasucks said:
when u put it to freeze make sure the naphtha turns milky when u blow on it. cover with plastic wrap put it in the fridge for an hour then into the freezer.

dont use the hot plate, u want to evap and cool it as slow as possible.
Click to expand...
By letting it dry slowly your allowing more of the naptha and other byproducts to filter out... without losing some of the dmt... therefore, increasing the yield... correct?
 
shepj

shepj

Oracle of Hallucinogens
floridasucks said:
when u put it to freeze make sure the naphtha turns milky when u blow on it. cover with plastic wrap put it in the fridge for an hour then into the freezer.

dont use the hot plate, u want to evap and cool it as slow as possible.
Click to expand...
I would imagine this is going to take a while to evaporate 300ml ;-)

Thanks for the advice, will follow.

I am guessing a new set of pics tonight.
 
floridasucks

floridasucks

Well-Known Member
shepj said:
I would imagine this is going to take a while to evaporate 300ml ;-)

Thanks for the advice, will follow.

I am guessing a new set of pics tonight.
Click to expand...
its probly gonna take most of the day, but if your freezing at least u dont have to evap till its all gone.

when im working with a bunch of naphtha like that i spread it out in the biggest glass baking dishes i have to speed things up.
 
shepj

shepj

Oracle of Hallucinogens
floridasucks said:
its probly gonna take most of the day, but if your freezing at least u dont have to evap till its all gone.

when im working with a bunch of naphtha like that i spread it out in the biggest glass baking dishes i have to speed things up.
Click to expand...
So it is just freeze precipitating the crystals? How do you recommend pulling the crystals out?
 
ANC

ANC

Well-Known Member
the crystals should stick to the glass, but will melt back into the naphta as it heats up, so you must work fast.
Pour the naptha off and back into your bark tea for another pull, it still has some DMT in.... the bark and the naphta.
then invert dish and stick back in the freezer for a few minute so last bits can dry off...

Finaly dry infront of fan to combat condensation.

DMT won't destroy you, It will only destroy what you are not.
 
ndangerspecimen101

ndangerspecimen101

Well-Known Member
ANC said:
the crystals should stick to the glass, but will melt back into the naphta as it heats up, so you must work fast.
Pour the naptha off and back into your bark tea for another pull, it still has some DMT in.... the bark and the naphta.
then invert dish and stick back in the freezer for a few minute so last bits can dry off...

Finaly dry infront of fan to combat condensation.

DMT won't destroy you, It will only destroy what you are not.
Click to expand...
A blanketed comfort of truth ANC... well spoken ;-)
 
P

Pghmailman

Member
Freeze percip gets the whitest fluffy xtals. Set up a funnel in a collection jar and put a coffee filer in it. Mr Coffee filters work better than Melita filters as they have no seam. Pull the jar out of the freeze, give it a quick swirl with the lid on them dump it into the filter. The xtals will stay on the filter and the naptha passes through. Put the jar back in the freezer with the lid off to evaporate any left over naptha out. Remove the filter from the funnel and set aside in a draft proof area. The naptha on the filter will evaporate off within an hour and you can just crease the filter and pour the xtals off. Once the jar in the freezer dries you can scrape it out. Usually put the goop onto a filter incase there is any moisture. There always seems to be.

For smoking you can't beat a glass vapor genie. Get yourself one of those metalic pot scrubbers. Torch it for awhile to burn off any impurities. Rip a hunk off and put it in the GVG bowl on top of the screen. Heat it up just a little and dump your dose on it. DMT has a very low melting temp and will melt into the wire scrubby piece. Put the cap on and vape away. Make sure you take that third hit.

Peace
 
ndangerspecimen101

ndangerspecimen101

Well-Known Member
Pghmailman said:
Freeze percip gets the whitest fluffy xtals. Set up a funnel in a collection jar and put a coffee filer in it. Mr Coffee filters work better than Melita filters as they have no seam. Pull the jar out of the freeze, give it a quick swirl with the lid on them dump it into the filter. The xtals will stay on the filter and the naptha passes through. Put the jar back in the freezer with the lid off to evaporate any left over naptha out. Remove the filter from the funnel and set aside in a draft proof area. The naptha on the filter will evaporate off within an hour and you can just crease the filter and pour the xtals off. Once the jar in the freezer dries you can scrape it out. Usually put the goop onto a filter incase there is any moisture. There always seems to be.

For smoking you can't beat a glass vapor genie. Get yourself one of those metalic pot scrubbers. Torch it for awhile to burn off any impurities. Rip a hunk off and put it in the GVG bowl on top of the screen. Heat it up just a little and dump your dose on it. DMT has a very low melting temp and will melt into the wire scrubby piece. Put the cap on and vape away. Make sure you take that third hit.

Peace
Click to expand...
We got liftoff ;)
 
shepj

shepj

Oracle of Hallucinogens
beakback said:
This method is food safe, correct?
Click to expand...
With Lye and Naptha? No.

Pghmailman said:
Freeze percip gets the whitest fluffy xtals. Set up a funnel in a collection jar and put a coffee filer in it. Mr Coffee filters work better than Melita filters as they have no seam. Pull the jar out of the freeze, give it a quick swirl with the lid on them dump it into the filter. The xtals will stay on the filter and the naptha passes through. Put the jar back in the freezer with the lid off to evaporate any left over naptha out. Remove the filter from the funnel and set aside in a draft proof area. The naptha on the filter will evaporate off within an hour and you can just crease the filter and pour the xtals off. Once the jar in the freezer dries you can scrape it out. Usually put the goop onto a filter incase there is any moisture. There always seems to be.
Click to expand...
Thanks. I tried to +rep you... new layout is fucked.
 
shepj

shepj

Oracle of Hallucinogens
UPDATE:

I have been away from my DMT work area for a few days (hence the lack of photos), but there is a shit ton of crystallized DMT (I have been switching between fridge:day time freezer:nighttime, to allow the crystals to grow larger -which they have done). The tek had a rocky start, but it is pretty damn solid now! It has definitely turned into something that anyone could do at home (and with all prices included it only costs ~$43)
 
gogrow

gogrow

confused
ndangerspecimen101 said:
Man I agree SHEPJ! Someone has to speak to the administrators about this. The layout alone is keeping away from this site now :(
Click to expand...
rest assured, your voice is accounted for, but in the end, all decisions here rest on one man's shoulders ;) i've yet to see many people praise the new skin.... especially without the option to change it......

regardless, how's the extraction goin shep? :)
 
You must log in or register to reply here.
Top