Dwc Information Thread for Everyone!!!!!

Status
Not open for further replies.

korial

Member
Why the last part of the first post is completely unstructered?
It's quite hard to read withouth paragraph and order.
Great thread otherwise.
 

wiimb

New Member
Why the last part of the first post is completely unstructered?

It's quite hard to read withouth paragraph and order.
Great thread otherwise.


i have been meaning to do it for days ill do it 2moro
sorry for inconvience :)
 

RobbieP

Well-Known Member
Hey Guys ! Wiimb your topic is very helpful !! i've never grown hydro so i had and still have a lot of questions wich i found the answers here ! I also wanted to make a noob question i dont know if here is the right place , but here it goes : " Imagine my tap water comes with 400-500 ppm , what shoud i do in the early stages ? Use reverse osmoses to get it to 0 ppm then add nutrients ? "
Thank you in advance for the great information !

you only need water for 1st 2 weeks of the seedlings life then you add your nutes at 1/4 strengh ... the ppm doesnt mean anything mate if you know its allready 500ppm from the tap and you want to make a nute mix with 500ppm in it , you just make it 1000ppm ...

Even with RO water i dont know if the ppms would drop to 0 as there will always be trace elements
 

black77

Member
Whats up RIU, I have been reading over alot of hydro sticky's and really liked it. I have been studying all aspects of hydroponics and am familiar with the basic principles. I have come with idea similar to RDWC with an eb&flow principle that I would like to run by all of you to get your input.

after reading Odin2u's post " the top third of the roots of the cannabis plant needs oxygen. The middle third needs both oxygen and water. Only the bottom third is satisfied with a liquid diet." and understanding the efficancy of oxygenated roots. I figured if you take the set up of eb& flow bucket system (for this example lets say a 4 bucket & res. set up) place air stones at the bottom of each 5 gallon bucket and run it continuously. when the pump turns on for the flood as the buckets fill w/ nute/water it becomes airated (Air stone in res. optional). When the pump turns off the solution returns to the res. the airstones continue to feed oxygen to the roots.

Thats the basic principle it. I tried to take all of the pros & cons of all the hydro methods and come up with a system that is just as efficant w/ less money. for example: should the power go out gravity then becomes your pump. your going to loose the airation but placing the res above or below buckets during the cycles will still allow you to feed your plants till you can get back up and running.(granted the ease of this is going to depend on the size of your garden). Now w/ the eb&flow your roots are not constantly sitting in the water so the potental for slime/salt build up is lowered. this system also since resembles the RDWC its 1 res to ph and temp.

To be clear this is not an idea I am trying to market or have any1 finance for that matter. I'm a low budget grower w/ a close co-op looking to become more efficant. To me the reason growing is so addicting is because the trail, error, & experimentation process is a high in itself. Any input would greatly be apreciated
 

UKHG

Well-Known Member
bloody hell u seen the cleanness of that grow room up ther"!

watever happened to just growing lol its going all sientific nowadays
 

burrr

Active Member
Whats up RIU, I have been reading over alot of hydro sticky's and really liked it. I have been studying all aspects of hydroponics and am familiar with the basic principles. I have come with idea similar to RDWC with an eb&flow principle that I would like to run by all of you to get your input.

after reading Odin2u's post " the top third of the roots of the cannabis plant needs oxygen. The middle third needs both oxygen and water. Only the bottom third is satisfied with a liquid diet." and understanding the efficancy of oxygenated roots. I figured if you take the set up of eb& flow bucket system (for this example lets say a 4 bucket & res. set up) place air stones at the bottom of each 5 gallon bucket and run it continuously. when the pump turns on for the flood as the buckets fill w/ nute/water it becomes airated (Air stone in res. optional). When the pump turns off the solution returns to the res. the airstones continue to feed oxygen to the roots.

Thats the basic principle it. I tried to take all of the pros & cons of all the hydro methods and come up with a system that is just as efficant w/ less money. for example: should the power go out gravity then becomes your pump. your going to loose the airation but placing the res above or below buckets during the cycles will still allow you to feed your plants till you can get back up and running.(granted the ease of this is going to depend on the size of your garden). Now w/ the eb&flow your roots are not constantly sitting in the water so the potental for slime/salt build up is lowered. this system also since resembles the RDWC its 1 res to ph and temp.

To be clear this is not an idea I am trying to market or have any1 finance for that matter. I'm a low budget grower w/ a close co-op looking to become more efficant. To me the reason growing is so addicting is because the trail, error, & experimentation process is a high in itself. Any input would greatly be apreciated
I've been doing that style for a few grows, and it worked well. check out the vortex journal, thats how a few rounds were grown. I've switched to a top feed/rdwc style lately, and I'm still seeing great results.
 
Status
Not open for further replies.
Top