Maine Grower15
Member
I currently grow in a tent, building a room hopefully tonight, I was thinking that thick insulation with the reflective silver on it or should I do drywall and paint bright white?
Getting ready to build my 1st room
- Thread starter Maine Grower15
- Start date
rnint
Well-Known Member
I'd definitely go with insulation man, it'll help keep your temps more even.
Maine Grower15
Member
I live in Maine normally mid 80s low 90s in the summer to you think I will have to use a a/c in the summer with the insulation rnint? Thanks for the help!!
pseudobotanist
Well-Known Member
Insulation for sure. Do you know the size of the room you're gonna build?
I'd do the frame then fit the insulation in between and cover it up with some plywood and paint that flat white that has titanium dioxide in it for better reflection than Mylar.
I'd do the frame then fit the insulation in between and cover it up with some plywood and paint that flat white that has titanium dioxide in it for better reflection than Mylar.
pseudobotanist
Well-Known Member
You're gonna want to do a few dry runs so you'll know the temps and humidity in there. You can always get a digital humidity/temp controller
Maine Grower15
Member
The insulation would also be the wall it had a reflective film should that work?pseudobotanist
Well-Known Member
That's what I used to build my kiln but check what the R value of it is. I don't know how well the reflective material is tho. For my kiln the R value came out to around 7.5 I believe most housings use an R value of 13 for the walls. There's a pink one that's Xps foam board 4x8 and is 2 inches thick with an r value of 10.
Maine Grower15
Member
I don't know what r value is, what is that? And I still plan on doing a 2x4 frame
pseudobotanist
Well-Known Member
2x4 frame is fine but I'm asking how big is your grow room going to be?
R value is the capacity that the insulation has to resist heat flow. The higher the r value, the better the insulation
R value is the capacity that the insulation has to resist heat flow. The higher the r value, the better the insulation
Maine Grower15
Member
Oh ok, and it's a 25x20 ft area split between 3 rooms I'll probably do an 8x8 8x8 4x8
One for each cycle of life
One for each cycle of life
pseudobotanist
Well-Known Member
Why don't you just split it into 2 rooms? Simple veg and flower
Maine Grower15
Member
Thats not a bad idea at all actually I didn't even think of that!! Just do two huge rooms
WattSaver
Well-Known Member
If you're using 2x4 framing then get some batt insulation R-13 it is the most economic. Definitely use plywood on the inside instead of drywall, it will give you the ability to mount whatever you want wherever you want.
What is your ventilation like, are you drawing air from another room or from directly outside? Outside air is generally much cooler at night than an adjacent room.
What is your ventilation like, are you drawing air from another room or from directly outside? Outside air is generally much cooler at night than an adjacent room.
Similar threads
