Glass shattered on air cooled hood

KrAzY80

KrAzY80

Active Member
So i just went down to check on the ladies and they were all diced up from the glass on my hood...It shattered into a million pieces. I have no idea why this happened. My temps run 78 degrees with a 600hps. I just ran 2 cycles with a 1000w bulb right before i went to the 600. Anyone know why this may have happened.
 
You probably won't get the best results in the DWC section.. lemme know if you want me to move it.
 
yeah that would be great, im always in this thread and just posted it not thinking where i was at
 
a little over a year now....its the xt lumanair series. I just was wondering if anyone else has had this happen before. I was just down there doin some shit and left and came back 10 min later and there was glass everywhere.
 
I'm thinking maybe Grow Room Design and Setup or Indoor Growing.. leaning toward the Grow Room Design

Edit: Moved to Grow Room Design and Setup
 
Cheep glass. Had one do that to me. Called the glass guy and ordered clear tempered fire place glass. Works great.
 
Yeah it is a cheap hood...think a paid 120 including shipping. Bastards, just glad I wasnt poking my head in there when it happened.
 
KrAzY80 said:
Yeah it is a cheap hood...think a paid 120 including shipping. Bastards, just glad I wasnt poking my head in there when it happened.
Click to expand...

glad you wasnt poking your head in there.........what..........like that little guy in your avatar picture. ---BANG---
 
Did the glass break like a car door.
Or big shards.?

If it was not tempered or heat treated it would break easily (an into big shards) under the lights heat.

Tempered is tough & high dollar, Id go with the cheeper 1/8 in pyrex sheet glass to replace it.
Pyrex will break easier than tempered, but can take just as much heat.
 
Yeah its cooled, thats the first thing I checked when it happened. Nothing has changed in the cab for a long time so it had to be defective glass. I have been running the same setup for over a year now and my temps are actually the lowest they have ever been. The only thing that I question is I have a humidifier running in there and I just refilled it 30 minutes before it broke.
 
SCARHOLE said:
Did the glass break like a car door.
Or big shards.?

If it was not tempered or heat treated it would break easily (an into big shards) under the lights heat.

Tempered is tough & high dollar, Id go with the cheeper 1/8 in pyrex sheet glass to replace it.
Pyrex will break easier than tempered, but can take just as much heat.
Click to expand...

It broke into a million pieces all over my plants, all mixed in with my hydroton and diced a bunch of leaves. But they snapped back after a few days
 
I have a piece of thick glass that came off one of those cheap walmart computer stands, its the right length for the slats that hold it up but its about 2" wider going across. Not sure how safe it is but its thick and heavy.
 
You are pulling air into the cooltube ? arnt you? non stop while the lights on? Maybe a fan failed.
 
Was just asking,I wonder if it sucked up some moisture and got it on the glass?
KrAzY80 said:
Yeah its cooled, thats the first thing I checked when it happened. Nothing has changed in the cab for a long time so it had to be defective glass. I have been running the same setup for over a year now and my temps are actually the lowest they have ever been. The only thing that I question is I have a humidifier running in there and I just refilled it 30 minutes before it broke.
Click to expand...
 
I was thinking either your inline fan vibration
Or simply the glass was not secured properly
The frame is cheap and the weather strip they use to make the unit airtight could curly up before you close it tight, causing uneven pressure
 
this happened to a friend on two hoods that he bought from maverick, we figured it was the temper and heat cause stress and eventually a crack then shattered glass
 
temps on your room may be ok but those bulbs radiate a lot of heat, a 1k bulb is some god awful number in the thousands hot on the inside(at ceritan areas)


the constant on and off and high heats can make fualty glass crack and since it is tempered once it cracks it shatters and breakers its a safety measure to prevent large pains of glass cutting your artery's and in this case chopping your plants

email and call and photo the evidence and send it into the fixture company and ask for a explanation and a refund if they are at fualt also they might want the hoods for inspection if you do this, and you may not get hoods rigth back but my buddy did so idk, just assuming not every case is the same
 
You must log in or register to reply here.

Similar threads

marzig
Cooling my DWC
Replies
1
Views
511
marzig
marzig
demarko
Heat Problems
2 3
Replies
59
Views
3K
demarko
demarko
shotnva777
Help me pick my 4x4 light! $350 to spend
2 3
Replies
41
Views
4K
Kief Stoned
K
E
CaMg issues after some improvements maybe?
Replies
3
Views
742
etc2003
E
Have2
Wth is going on...
2
Replies
22
Views
1K
Have2
Have2
Back
Top