Grow Chamber's, HATCH Style

From The Desk Of:
""HATCH Design Corporation HeadQuarters""



Plan's For Closet Grow.

Ok, First Picture Show's You Where Thing Can Go.

2). Show How To seal The Flower Room, you Are Going To Build Two Panel's, One For The Side, & One For The Front, The One In The Front Will Need Two Door's Cut In, Keep The Cut Out, It The Door. Do a Good Clean & Square Job Cutting It Out, So The Door's Fit Back Good, & I Just Need To Look Good!!!,,Finish Up Cutting The Corner's With A Jigsaw, You Don't Want Cut Mark's In It, Because Of Light Leak's.
You Will Trim The OutSide Of The Door With 1x4's, & Trim The Inside Of The Opening's With 1x4, Letting Them OverHang To The Inside Of The Opening, This Will Lock-Out Any Light... After All Said & Done, I Like To Just Screw My Door's On & Off, So They Are Out Of The Way.

I Have Added The Last Picture's Showing You How To Inter-Lock The Corner Also To Block All Light From Thr Flower Room.

Look It Over, & See What You Think?????,,,,,,,,,Later, HATCH Design Corporate CEO


patent pending

BOYYY, you gonna get me trouble!!! shit you just woke my ass up!!! easily the best config for my closet, *custom made biatches* I just want everyone to know those are NOT the specs of MY closet. hatch your the bomb my man! sorry this ogkush gotcha beat though, its pulling me into my couch!!!!!!! shit Im stuck. anyway I'll be copying tha first pic by hand and tackin it to my wall... Tommorow....WE BUILD!!!!!!!!! and btw nice to knock out one bitch with two nuts....I wish I could build those light tight doors..but I have the kind of doors that have a hinge in the middle and the two doors slide over and fold ontop of eachother...It will make it easy when it comes to seperating the areas for sure....I might not have read it right but I don't think THOSE light tights will work for me...I may be wrong though...you motha fuck ROMULAN!

assrabbi said:

BOYYY, you gonna get me trouble!!! shit you just woke my ass up!!! easily the best config for my closet, *custom made biatches* I just want everyone to know those are NOT the specs of MY closet. hatch your the bomb my man! sorry this ogkush gotcha beat though, its pulling me into my couch!!!!!!! shit Im stuck. anyway I'll be copying tha first pic by hand and tackin it to my wall... Tommorow....WE BUILD!!!!!!!!! and btw nice to knock out one bitch with two nuts....I wish I could build those light tight doors..but I have the kind of doors that have a hinge in the middle and the two doors slide over and fold ontop of eachother...It will make it easy when it comes to seperating the areas for sure....I might not have read it right but I don't think THOSE light tights will work for me...I may be wrong though...you motha fuck ROMULAN!

Click to expand...

Let Me Make My Self Clear, You Are Going To, Have To Build The Side Panel & The Front Like That, Or All You Will Be Growing Is Hermies, From The Light Leak's, That Very Important!!!,,,,You can Build Those Door's & Trim Them Like That, It's Easy, Just take Your Time & Do A Good Job!!!.....You can Still Use The Other Door's To Close Everything Off, The Flower Room Will Be Inside The Closet!

What Were You saying about The Light's, You Fucking Lost Me There????

oh and my exhaust right where you have the top 2' floro on the clone side I have a hatch that goes to an attic, the floros can hang fine...but that hatch is important for venting...my ladys calling me to the SACK. later Hman talk to you shorty. if you catch this anytime soon, maybe you could tell me some basics I should start getting? mainly what gph range should my pumps be? other than that I'm gonna get wood to make the frame and the rubbermaids, anything else I need that I could get ASAP? oh yes da chronic. of course! later.

assrabbi said:

oh and my exhaust right where you have the top 2' floro on the clone side I have a hatch that goes to an attic, the floros can hang fine...but that hatch is important for venting...my ladys calling me to the SACK. later Hman talk to you shorty. if you catch this anytime soon, maybe you could tell me some basics I should start getting? mainly what gph range should my pumps be? other than that I'm gonna get wood to make the frame and the rubbermaids, anything else I need that I could get ASAP? oh yes da chronic. of course! later.

Click to expand...

If It Will Fit Better You Can Always Just Flip The Plan's ,,,,,,,,But Hey Don't Jump The Gun, By This Afternoon I'll Post A Material List Of Every Nut & Bolt!!!

You Act Like I'm On The Clock Or Something, Remember, I'm Old, & Take A Hole Minute, & Suck Remember????

Go Fuck Your Old Lady Or Somthing, I'm Going To Eat Breakfast!!!!

Materiel List For Closet Grow:

2) Sheet's 3/4" 4'x8'x8' Plywood- For The Divider Panel, & Front Panel Of Flower Room

6) 2'x4'x8' - 2x4's For The Stand, & Frame For The Bubbler's, Rip It In 1/2, & It Will Go Farther, & Work Better

6) 1'x4'x8' - Corner Trim, & Door Trim

1) Small Box Of 1 1/4" #8 Wood Screw's

1) Small Box Of 2 1/2" #8 Wood Screw's

1) Small Box Of 3" #8 Wood Screw's

1) 1/4" Tap- To Predrill, & Conter-Sink Holes For The Scew

That Will Get It Built!!

Materiel For Production:

5) 10 Gallon RubberMaid's- For Bubbler's & Aeroponic Pod's

1) 14 Gallon RubberMaid-For Res. In Flower Room

3) 260gph Pump's- For Bubbler's

1) 900gph Pump - For Flower Aeroponic's

2) 468cfm Squirrel Fan's - One For Exhaust, & One For Intake In Flower Room

2) 250cfm Squirrel Fan's - One For Exhaust & One For Intake In Clone - Mom Room

Get To Work!!!!

I'll Have The Break-Down Of The Bubbler's, & Aeroponic Pod's Next, In A Hole Minute.....Later

HEY!!! I aint actin like your on the clock, just a bit manic sometimes!!! and like I said there is a big difference in the observation of time between a 20 and 40 year old...oh and Ima fast typer? anyway oldtimer...got my rubbamaids 5-10 gals, one 16gal (same exact height as the 14, the extra volume is on the sides) uhhh lets see I got a pump from a friend who used to assemble large indoor aquariums, it looks like this Little Giant Pumps PES-1000-PW - 566296 - 1000 GPH Mag Drive Pond Pump
1000gph, good?
uhh have a stack of 10ft 2x4s got all the hardware(screws nsuch)

I have a can fan that pulls over 300cfms, its hooked on one end of my 600w and on other end of the light I have ducting going up to the attic, could I just use this as my cloining room exhaust? and then get a big squireel cage for the flowering room.

I knocked a lot of that shit out
now with this list Ill have all my materials by tommorow!!! wicked, and you mean a tap bit for a drill right? cause I have a set of those...its startin to become a reality man!!! so quick!!! well I'll be waitin for this minute to pass.

man too bad I don't live in the republic of texas no more!!! I'd just haul all my shit out there and make you help me assemble it!!! kidding mang...these plans and all these pics are AWESOME!!! I would have litterally taken me a year to gather all this info on my own, then probably another year before it got underway...but shit I'm on my way to a bomb lil aero setup in what 2 days!!! yeeeehaw~!

assrabbi said:

HEY!!! I aint actin like your on the clock, just a bit manic sometimes!!! and like I said there is a big difference in the observation of time between a 20 and 40 year old...oh and Ima fast typer? anyway oldtimer...got my rubbamaids 5-10 gals, one 16gal (same exact height as the 14, the extra volume is on the sides) uhhh lets see I got a pump from a friend who used to assemble large indoor aquariums, it looks like this Little Giant Pumps PES-1000-PW - 566296 - 1000 GPH Mag Drive Pond Pump
1000gph, good?
uhh have a stack of 10ft 2x4s got all the hardware(screws nsuch)

I have a can fan that pulls over 300cfms, its hooked on one end of my 600w and on other end of the light I have ducting going up to the attic, could I just use this as my cloining room exhaust? and then get a big squireel cage for the flowering room.

I knocked a lot of that shit out
now with this list Ill have all my materials by tommorow!!! wicked, and you mean a tap bit for a drill right? cause I have a set of those...its startin to become a reality man!!! so quick!!! well I'll be waitin for this minute to pass.

Click to expand...

What Ever, I Might Be 43, & My Inside Are Like A 80 Year Old, But My Mind Is Still Back Like I'm 18, & 10'-& Bullet Proof!!!!

Ya, Sound's Like That Pump Will Work For The Aero, Just Hope It Put's Out Enough PSI, To Get A Good Fine Mist????,,,,That's Why I Use Jet-Pump's For My Aero System's.

Everything Else Sound's Good........Hey Get Me The Exact Measurement Of The Closet Width, Depth, & Exact Height, & I Will Tell You The Length's To Cut Everything???? A Picture Of The Space Would Be Nice, & The Bifold Door, Some Of Them Run On A Track, & Hinge Out, & Some Hinge In & You Loose About 6" to 7" Into The Closet???

What The Fuck, You Aren't Flowering, & Harvesting Your First Crop Yet?????,,,,,,,,,,You Newbie's!!!!!

assrabbi said:

man too bad I don't live in the republic of texas no more!!! I'd just haul all my shit out there and make you help me assemble it!!! kidding mang...these plans and all these pics are AWESOME!!! I would have litterally taken me a year to gather all this info on my own, then probably another year before it got underway...but shit I'm on my way to a bomb lil aero setup in what 2 days!!! yeeeehaw~!

Click to expand...

Ya, I Bet You I Could Have It Built & Running In 6 Hour's, If Everything Was There!!!!,,,,,,The Trick Is To Have Everything There You Need, Know The Measurement & Cut Everthing That Need's To Be Cut Before You Start Putting Thing's Together, It Also Help Know Where To Start, & What Need's To Go First, In What Order You Are Going To Need Them, & Then Mass-Produce Everything Just Alike!!!!!!,,,,,,,,,Ya, That's Right I'm Smarter Then Your Average Bear-BOO-BOO!!!,,,,,,& Lightning Fast!!!!!

Oh Ya, & Your Welcome Youngster!!!!!!

Im flowering my first crop, the door is on a track and hinges out, I guess I might as well just remove the whole door? make things a bit simpler maybe? I really think its kind of a pain in the ass...what psi should the pump be? glad he gave me this one...otherwise I was just waiting till you gave me a suggestion for some good pumps......

Im on the measurments and pictures...give me a whole minute (like 30 minutes)

gotta a be a newbie before I can be the aero-king!!! Im staging a coup!

assrabbi said:

Im flowering my first crop, the door is on a track and hinges out, I guess I might as well just remove the whole door? make things a bit simpler maybe? I really think its kind of a pain in the ass...what psi should the pump be? glad he gave me this one...otherwise I was just waiting till you gave me a suggestion for some good pumps......

Im on the measurments and pictures...give me a whole minute (like 30 minutes)

gotta a be a newbie before I can be the aero-king!!! Im staging a coup!

Click to expand...

Hey If The Door Hinges Out, I Would Leave It, Don't Tear It Up, If It Would Make Thing's Easier For Constuction, Ya take It Down, Put Save It So You Can Put It Back, It Can Come In Handy In The Long Run!!, It No Big Issue,,,,,,,,,,,I Gave You A Picture Of The Pump's That Will Work Good For The Bubbler's????AAAAAAAUUUUUUHHHHHHH, Ya, Get Her Done!!!

Psi????????????????????

pounds per square inch

yeah shortbus, I know what it means, don't butt in less you know your place!!! if YOU would like to answer my question, what psi am I looking for on a 1000gph pump for aeroponics? muchos gracias!!!! gringo.

sry freindly guy.... yall take care im out

please dont leave me....

Im only on the first few pages and didn't want to lose this one.
Great detail and pics. I will have to take my time reading this one.
Hope to see more.

Peace-

hothousemary said:

sry freindly guy.... yall take care im out

Click to expand...

Say Bro, Stick Around, All In-Put Is Good In-Put!!!

LoganSmith said:

Im only on the first few pages and didn't want to lose this one.
Great detail and pics. I will have to take my time reading this one.
Hope to see more.

Peace-

Click to expand...

Well Hey What's UP????,,,,,,,,,Thank's For Coming & Hanging Out!!!,,,,,Take All The Time You Need, The Light Stay On 24/7 Around Here!!!