Help Diagnose Issues w/ my babies first grow. :)

Pictures

Strain – Dough G (2 decent looking ones), Black Afghan (best looking one), Runtz(shit)

Grow media - CoCo

Nutrients - Advanced PH Technology grow,micro,bloom - 5 ML per Gallon (One of Which is only 3.4 ML marked on bottle believe it is bloom away from my grow tonight just digging for answers while I’m gone worrying like a

Feed/water sched – once/day in 1 Gal Pots. Spray soil once a day with the same as feed.

ppm/ec - unk

pH -5.8 - 6

Temps, 69F lights off. 72 - 74F lights on.

Light specs - bloom plus bp1000

Distance? 20 Inches?

Hunidity - 50 % - 65% have ventilation too and fans going in the tent.

So for the first grow here my ph was off I believe for a little I’ve since corrected and 2 have rebounded and new grow on one looks good but the small runt which strain is runtz lhhh is still gross. Any ideas on things I can improve on.

I used some neem oil in the just sprayed it to get rid of gnats gnats are now gone wasn’t much too them though.

believe I was under watering because I was letting the coco getbit dry as I didn’t want to overwater.

recently transplanted them to the 1 gals they were in solos.
Any advice I would love thanks guys pics attached

Dough G Plant #1


Black Afghan (Left Front)



Runtz (I look at this one and it makes me wanna take a shit lmfao)


Dough G Plant #2

JESUS… those plants are fucked up , did a pit tear it up

eC meter mandatory

Dude, give it up in coco. Seriously. Go buy some Pro Mix or Sunshine 4 and keep it simple. Coco first grow is seriously not recommend and you see why

hotrodharley said:

Dude, give it up in coco. Seriously. Go buy some Pro Mix or Sunshine 4 and keep it simple. Coco first grow is seriously not recommend and you see why

Click to expand...

Nah mama didn’t raise a quitter I just need a lil help hahaha

First of all
eC meter
flush it with clean fresh water with correct pH also you can add hydrogen peroxide 11% 2ml per 1 l.

Then check your water and adjust to correct eC I would suggest that for this situation 0.6 is ok.

Zmetrakilo said:

First of all
eC meter
flush it with clean fresh water with correct pH also you can add hydrogen peroxide 11% 2ml per 1 l.

Then check your water and adjust to correct eC I would suggest that for this situation 0.6 is ok.

Click to expand...

How do you adjust EC I just know about ph never heard of EC.

since adjusting my ph and transplanting they actually look better then they did lol

An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. It has multiple applications in research and engineering, with common usage in hydroponics, aquaculture, aquaponics, and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.

How do you

Zmetrakilo said:

An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. It has multiple applications in research and engineering, with common usage in hydroponics, aquaculture, aquaponics, and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.

Click to expand...

how do u adjust ec

By adding correct amount of nutrients like you said A and B to get correct reading.

I used word correct because it's all based on your water. Hard water high eC soft low with this knowledge you easily can adjust correct amount of nutrients to your water.

What are the specs on the light you are using? Also, the temperatures are too cool if that is an LED light. A lot of plants that look like this are underlit. Also, what is the EC of the feed you are giving them? Are you watering to 20% runoff?

Rurumo said:

What are the specs on the light you are using? Also, the temperatures are too cool if that is an LED light. A lot of plants that look like this are underlit. Also, what is the EC of the feed you are giving them? Are you watering to 20% runoff?

Click to expand...

Can you do me a favour and recommend some eC meter for small home grow.
Thanks