Hlg 550 vs LED strip light 480 w

Powertech

Well-Known Member
Likely the strips, and i'm against HLG anything. If you go the board route there are a plethora of manufactures now
 

Mohamed.

Member
There is a huge price difference between the two! you have to be more specific which lighting you're talking about.

I assume you're talking about 'HLG 550 V2 R-Spec' which is geared towards flowering and full cycle and the "ECO FARM 480W Samsung 561C chips LED grow light strip". Honestly they both suck in my opinion. ECO Farm light doesn't even provide an electromagnetic spectrum graph for their light which at this price they should. They both seem like they are geared towards vegetative growth.
 

fredthesmoker

Active Member
There is a huge price difference between the two! you have to be more specific which lighting you're talking about.

I assume you're talking about 'HLG 550 V2 R-Spec' which is geared towards flowering and full cycle and the "ECO FARM 480W Samsung 561C chips LED grow light strip". Honestly they both suck in my opinion. ECO Farm light doesn't even provide an electromagnetic spectrum graph for their light which at this price they should. They both seem like they are geared towards vegetative growth.
Which light do you prefer for 4×4, without talking price :)
 

Mohamed.

Member
Do you mean between those two or in general? If you're talking in general and without talking price :o Well in this case I can recommend a light that I myself wouldn't dream of buying lol.


Go through this link and you will find great information. This is what I call specialization and good information if I'm willing to pay that much money for an LED light. About 400 Watts of actual power draw LED is about right for 4' x 4' space.

Other than that, a lot of LED grow lights sold on amazon with about 400 Watts of actual power draw would perform pretty damn well. Although I would recommend getting two, each is about 200 Watts for better light distribution.
 

fredthesmoker

Active Member
Do you mean between those two or in general? If you're talking in general and without talking price :o Well in this case I can recommend a light that I myself wouldn't dream of buying lol.


Go through this link and you will find great information. This is what I call specialization and good information if I'm willing to pay that much money for an LED light. About 400 Watts of actual power draw LED is about right for 4' x 4' space.

Other than that, a lot of LED grow lights sold on amazon with about 400 Watts of actual power draw would perform pretty damn well. Although I would recommend getting two, each is about 200 Watts for better light distribution.

I could buy weed on the black market for days for that amount of money the strip bar i was talking about was this one; kingbrite 480w LED strip light lm301b..
Is that a bad one ? Otherwise im gotta change my order
 

Powertech

Well-Known Member
Do you mean between those two or in general? If you're talking in general and without talking price :o Well in this case I can recommend a light that I myself wouldn't dream of buying lol.


Go through this link and you will find great information. This is what I call specialization and good information if I'm willing to pay that much money for an LED light. About 400 Watts of actual power draw LED is about right for 4' x 4' space.

Other than that, a lot of LED grow lights sold on amazon with about 400 Watts of actual power draw would perform pretty damn well. Although I would recommend getting two, each is about 200 Watts for better light distribution.
That's like buying a KIND light 10 years ago. Same technology as everybody else with better packaging and a few gimmicks, 5 times the price. I bet it cost them less than $100 to build
 

Mohamed.

Member
Lol, well that's why I said I wouldn't buy it myself, it's very pricey.

No, for a price of about 330 dollars, this kingbrite light is not bad actually. I initially thought you were talking about Eco Farm strip light which is about double the price. So yes, go for it.
 

Mohamed.

Member
That's like buying a KIND light 10 years ago. Same technology as everybody else with better packaging and a few gimmicks, 5 times the price. I bet it cost them less than $100 to build
Surely they have a huge profit margin on it. Almost non of those LED manufacturers actually do credible research. Research is done on best lighting for the plants and is freely available everywhere. Those manufacturers just followit. Like for example, years ago they had only red and blue spectrum and they were convinced it was the optimum lighting, then they started adding some white LEDs to the mix, then they added UVA and far red LEDs and then in the future they will start adding some UVB LEDs (but those LED are very pricey at the moment). As time passes, they will end with the same spectrum as the sun :D.
 

Powertech

Well-Known Member
Surely they have a huge profit margin on it. Almost non of those LED manufacturers actually do credible research. Research is done on best lighting for the plants and is freely available everywhere. Those manufacturers just followit. Like for example, years ago they had only red and blue spectrum and they were convinced it was the optimum lighting, then they started adding some white LEDs to the mix, then they added UVA and far red LEDs and then in the future they will start adding some UVB LEDs (but those LED are very pricey at the moment). As time passes, they will end with the same spectrum as the sun :D.
UVB LED's? Hmmm...like these 280nm and 310nm strips?
 

Attachments

Powertech

Well-Known Member
KIND is actually still out there ripping people off. WTF, $1600 for basically what you get on Amazon for around $400 lol. I guess $1200 for their fancy controller?

 

Mohamed.

Member
Yup. Just put them in service last night on a very temporary means of hanging lol. Working on the frame for a bunch of lights right now.
Well then, you're ahead of the curve my friend :D

Amazing looking tops! and you seem to have a mix of light types in this tent!

So how much did you pay for these UVB strips? Also another question, how much watts per square foot would you say you have in your grow room?
 

Powertech

Well-Known Member
Well then, you're ahead of the curve my friend :D

Amazing looking tops! and you seem to have a mix of light types in this tent!

So how much did you pay for these UVB strips? Also another question, how much watts per square foot would you say you have in your grow room?
$270 for the set - not including driver and heatsink. I'm running them at 50W ea.
My lights have been constantly changing, just about there though. Up till now I have had 1140W total in the flower tent, 790 whites, the rest reds and UV's. I am splitting it up currently because I need to flower another tent. Also have an AGLEX 2000 in another tent. 960W of more lights are on the way but will not be here for another month. I guess I am finishing the tent at a lot less than it should be finished at, but oh well. I will combine the lights back up when the other lights get here as they will be a separate test for somebody
 

bk78

Well-Known Member
Do you mean between those two or in general? If you're talking in general and without talking price :o Well in this case I can recommend a light that I myself wouldn't dream of buying lol.


Go through this link and you will find great information. This is what I call specialization and good information if I'm willing to pay that much money for an LED light. About 400 Watts of actual power draw LED is about right for 4' x 4' space.

Other than that, a lot of LED grow lights sold on amazon with about 400 Watts of actual power draw would perform pretty damn well. Although I would recommend getting two, each is about 200 Watts for better light distribution.
Wait so you think this is better then the 550 or any strip build?
 

Mohamed.

Member
$270 for the set - not including driver and heatsink. I'm running them at 50W ea.
My lights have been constantly changing, just about there though. Up till now I have had 1140W total in the flower tent, 790 whites, the rest reds and UV's. I am splitting it up currently because I need to flower another tent. Also have an AGLEX 2000 in another tent. 960W of more lights are on the way but will not be here for another month. I guess I am finishing the tent at a lot less than it should be finished at, but oh well. I will combine the lights back up when the other lights get here as they will be a separate test for somebody
Oh that's pricey but I think it should be effective. I have a question on the technical side if you don't mind, did you try to calculate the umol/s of those UVB strips and try to match them to what the sun provides at the UVB spectrum? I mean, aren't you afraid that you might be going overboard with these UVB lights which might actually harm your plant? Or do you put them on a timer on their own? I'm very interested in this UVB stuff.
 
Top