How can i keep my plant under 10 inch and still make it flower

How can i keep my plant under 10 inches tall and still get a good harvest off it and also for lighting i am using 2 halogen table lamps will this be ok as i only have a small space in the bottom of my wardrobe the seeds are ata tundra.

you could basicly just chop the top off.it should make it slow the growth upwards.but make it bush out.

Not sure if you can use the halogen, but to keep the plant small
try 'topping' it. There is a good description of this in the growFAQ.

STE1979 said:

How can i keep my plant under 10 inches tall and still get a good harvest off it and also for lighting i am using 2 halogen table lamps will this be ok as i only have a small space in the bottom of my wardrobe the seeds are ata tundra.

Click to expand...

hologen lights wont work ther wrong

https://www.rollitup.org/view.php?pg=faq&cmd=article&id=685
https://www.rollitup.org/general-marijuana-growing/723-things-know-about-lighting.html
CFL Growing

So what type of light can i use as i am only growing 1 plant.

Go CFL my friend.

STE1979 said:

So what type of light can i use as i am only growing 1 plant.

Click to expand...

i posted links to all the information you need

If you are trying to grow in that small of an area i would use CFLs(compact fluorescent). If you want you plants that small you will either need to train it or have a mother plant for clones and start them flowering at a few inches

So how can i set it off flowering at only a few inches and how much bud would i get off it.

Would i be able to use a ultraviolet light to make it grow.

You go to flower by switching the lights to 12/12.

Check out the grow FAQ when you have time to do some reading.

easy...veg it till its about 5 inches and flower...it might be 12 inches at the end

theres MANY ways to do it.
1. top it, in other words, cut the tiny growth tip at the top of the plant, but this causes alot of stress on the plant, which may turn it to a male.
2. turn the lights to 12/12 as soon as the seedling pops through the ground, but depending on strain it could grow much taller than 10in.
3. LST (Low Stress Training) you tie the top of the plant almost to the soil and keep doing that....

any way you choose, youve pretty much have no choice but to flower as ealy as possible.

check the GROWFAQ. everything you need is in there
have fun

Check out my grow, I began flowering at 9" or so.

If you're using halogens, i'm not really sure how you might be able to spread light around the plant. But... if you can hook yourself up 2/3 27 Watt CFL's to the sides.... This will cause the plant to focus growing moer branches from the sides instead on focusing on growing tall the few it has, and the more tops for you.


And make sure you're doing your share of topping and fimming, plays a big roll in trying to maintain height. And if it gets too tall, you could always bend and tie.

Goodluck.

he could, your right..
BUT... like i said hes only growing one plant its best not to stress the plant at ALL hoping for a female

Well im going to be using halogen table lamps placed roughly 5 inches above it on and i am using 3 lamps so i should be able to cover all the plant. but just to be on the safe side how much would the lamp be i need and how would i set it up in my wardrobe

ho;ogen lights no good get some cfls or sumthing all halogens will do for ya at 5 inches is fry your plant

hey guys i know this has absolutelty nothing to do with his question but can somebody tell me how to start a thread

smalltownDill said:

hey guys i know this has absolutelty nothing to do with his question but can somebody tell me how to start a thread

Click to expand...

topleft it says new thread click on it