crazycanuk
Member
here it is, the new space that will soon replace my tent for.... "Strategic" reasons 
comments, questions?
comments, questions?
Incogneto wall space/ storage cupboard
- Thread starter crazycanuk
- Start date
ow.douglas
Well-Known Member
Pretty clever, don't spill anything on the Berber carpet or you will never hear the end of it. How are you going to get air in and out of there?
crazycanuk
Member
i drilled several large 1 inch holes in the top of the structure to act as exhaust and i cleverly build the unit with dead air spaces and one on the bottom will be where it inhales air from.
crazycanuk
Member
its more or less ready, i have more pics so you can see exactly what i did... i need to clean up the area and get a desk in so the illusion is complete before i post the follow up here 
.. its pretty sweet
.. its pretty sweet 
Danielsgb
Well-Known Member
I looked more carefully, that is sweet. I would defiantly slide something under to cover that carpet. Maybe a piece of linoleum, maybe something even better. Even trying to be careful little spills happen. Even bigger spills/messes can happen after a
or . What is the dimensions? May need more Exhaust? Looks like enough intake.
or . What is the dimensions? May need more Exhaust? Looks like enough intake.
crazycanuk
Member
ok so heres what i did.. once the doors were on and such, i made it so the floor section was iscolated and was able to be used as the intake . as well as being lined with plastic in 2 layers.
the top i used the 1 inch holes to attach some flexable ducting and a cheap metal fan from wall mart ($5)
the covering thats cheaply put on the flexable ducting is because i used white flexable duct, bad idea, i dont want the light transfering thru it , either direction. so i used the one side black/one side white plastic to shield the light, worked ok but i might changet the duct type/color .
i didnt take a picture but as to not hurt my closet with holes, i built a basic structure out of 2X2's, 2 legs at the back with a cross member, front attached to my cabinet.
lights hang on pullys and Nylon Rope from the wood structure up top. i just looped it over the wood , whene i lower or rais the structure i use one arm to remove the tension and weight and the other to tighten the rope, i have on both sides 2 long wood screws facing away from eachother. i use that to wrap the rope around to tie it down and ensure the lights dont fall.. like a sailboat thingy you wrap the rope around.. lol
there is one light at back and a removable light up front for access, its for extra underfoliage penetration with the Florescent lumens.
um.... thats about it.. its all lined with white plastic and the front sealed with same plastic and Velcro the keep light in so the cabinet stays incogneto.. day cycle is 9PM - 9AM as to reduce chance of guests around and such.. its quiet enough with some faint audio from the TV or computer will drown it out. but you can never be to carefull.
the cabinet is complete with Lock to keep my secrets secrets.
any questions im happy with
EDIT: Right plant was later Executed tonight.... he was trying to defile my beautifull lady on the left!!!
it wouldnt take the pics other ways so il add them this way, there gunna be big.. sorry!
. as well as being lined with plastic in 2 layers.the top i used the 1 inch holes to attach some flexable ducting and a cheap metal fan from wall mart ($5)
the covering thats cheaply put on the flexable ducting is because i used white flexable duct, bad idea, i dont want the light transfering thru it , either direction. so i used the one side black/one side white plastic to shield the light, worked ok but i might changet the duct type/color .
i didnt take a picture but as to not hurt my closet with holes, i built a basic structure out of 2X2's, 2 legs at the back with a cross member, front attached to my cabinet.
lights hang on pullys and Nylon Rope from the wood structure up top. i just looped it over the wood , whene i lower or rais the structure i use one arm to remove the tension and weight and the other to tighten the rope, i have on both sides 2 long wood screws facing away from eachother. i use that to wrap the rope around to tie it down and ensure the lights dont fall.. like a sailboat thingy you wrap the rope around.. lol
there is one light at back and a removable light up front for access, its for extra underfoliage penetration with the Florescent lumens.
um.... thats about it.. its all lined with white plastic and the front sealed with same plastic and Velcro the keep light in so the cabinet stays incogneto.. day cycle is 9PM - 9AM as to reduce chance of guests around and such.. its quiet enough with some faint audio from the TV or computer will drown it out. but you can never be to carefull.
the cabinet is complete with Lock to keep my secrets secrets.
any questions im happy with
EDIT: Right plant was later Executed tonight.... he was trying to defile my beautifull lady on the left!!!
it wouldnt take the pics other ways so il add them this way, there gunna be big.. sorry!