That’s definitely on the colder side. I’ve gotten it to evap in the 60s but never tried as low as you are talking. I use a fan blowing over the surface to provide enough air movement to get the evaporation to happen. If you’ve gotta add some heat, I’d just keep it as low as possible so it just barely raised the temps up.
I usually evap at room temp as well and 24 hrs with some air movement will usually evap a full quart of alcohol no problem. Froyd is talking about having temps down in the 30-40s though, maybe they are working in a garage??
Definitely in the garage. Not quite doable with an oil radiator. It keeps it above freezing in the garage but that is about there. Also, there is absolutely zero insulation in the walls.
Can you get a wide Pyrex dish, that’s my favorite evap container.
Was looking at a 11x16 but really would like larger than that.
My research activities into that topic disappointed.
Silicone and cannabis extract destroy each other. I think the residual catalyst in the silicone speeds up extract’s tendency to turn into brittle varnish.
Really. Iv been using the same silicone container for my wax for years