Jigfresh's DIY Closet DWC Scrog 650w HID - Hindu Skunk & White Widow- First Grow Ever

jigfresh

Well-Known Member
Good luck with this grow. I almost went with a DWC scrog in 42g res for my new setup so I'll be watching this.
Thanks bro.

Today was exciting, disappointing, and a bit overwhelming. I got my big delivery. Included was: Air pump, air stones, hydroton, 4" to 6" venting, MH conversion lamp, HPS son agro lamp, lamp socket, heavy duty timer, 6" net pots, DM advance nutes grow a+b, flower a+b, and GH ph up & down. The receipt says $435.16 incl tax and shipping.

My fan, fan controller, and ballast are on backorder, and were actually shipped just today. Delivery should be Feb 4.

So, I'm a dumb ass for a couple reasons. For one my air pump said it had a 1/4" id (which it does), it also came with a four way splitter. Now, if we all stop to think about things here we could deduce measurements for the splitter. If the pump has a 1/4" entrance do we imagine the 4 exits to be the same size OR smaller than the inlet. Smaller makes sense, why would you split a flow 4 ways, hoping to maintain a good flow, and keep the diameters the same. You wouldn't. So the exits are smaller than 1/4", but (due to lack of foresight) my setup has 4 - 1/4" hoses, and 4 - 1/4" air stones. I'm not really sure what to do now. Get new smaller hose and stones, get an additional pump and get 2 way splitters, split the pump I have 4 ways. I don't know. What really sucks about the whole thing is this: I was originally going to get the larger air pump available from the site I ordered mine from. However, I wanted to have the 1/4" id stuff and the pump had a 3/8" id. And I bet the splitter that came with that would have worked perfectly for me, and I would have had more air.

I don't feel that stupid about the air pump. It's not the dumbest thing you can do. Dumbest thing you can do describes my next mistake. I actually made it a couple weeks ago, but realized today. When I was drilling the holes on the side of my reservoir, I wanted them as high as possible. But when I was about to drill I decided I would drill them below the level of the handles on the side of the rubbermaid. This was with the idea of wrapping the tubes around and having it look 'clean'. STUPID.:wall: I cut a hole in the top of my rubbermaid, laid a net pot in and, you guess it, the holes were below the level of the bottom of the net pot.

So, I have to get a new rubbermaid and drill some new holes. Tape it up again. However it is not a total loss. I was thinking I would need an extra rubbermaid, just like mine, for when I change the water and clean things, I can replace the working one with the extra, just as a holder or table. You know what I mean?

Next steps are to make a new rez, figure out what to do with the pump situation, work on building the reflectors, cut holes in my closet door/ roof.

Oh, in case you wondered I ordered my stuff from http://www.plantlightinghydroponics.com/

I also included a picture of two of our cats. The white is a girl and black a boy. They are boyfriend and girlfriend. It's cute, they cuddle and bathe each other all the time.
 

jigfresh

Well-Known Member
Today I was spending more time reading about scrog's. I have read a few times that the idea is to train your plant to have a cola per square of screen.

I got 233 - 2" x 2" holes to fill.

This is going to be fun.
 

threepete23

Well-Known Member
Hey there, I am in a similar situation as you. Same size closet for growing, same size lights, same DWC method, 6 sites in the lid.

I understand the screen in the tub, making sure the roots dont get tangled. but why do you not want them tangled?
 

jigfresh

Well-Known Member
Hey there, I am in a similar situation as you. Same size closet for growing, same size lights, same DWC method, 6 sites in the lid.

I understand the screen in the tub, making sure the roots dont get tangled. but why do you not want them tangled?
This being my very first grow, I'm not sure. But I can tell you I've read about people complaining their roots were tangled and how sometimes they have had to separate them at much danger to the health of the plant.

My guess is that if everything goes perfectly with a grow tangled roots might not cause a problem. Imagine (god forbid) one of your 6 dies. Now you have to remove it meaning you eiter trim the roots away of it's healthy neighbors, or you leave dead roots tangled with healthy ones. Not to mention having dead material in your resivoir.

I could also imagine (god forbid) the lid of the rubbermaid getting messed up somehow (like craking under weight, or getting a hole burned through???, i don't know) any how, there would be no way of getting the lid off the other plants and then getting them into a new lid without cutting the roots.

Those are my guess'. Try asking the dwc forum. I bet you would get an actual answer.

Power to the DWCers.:weed:
 

threepete23

Well-Known Member
That makes complete sense, I think im going to place those dividers in on my next resi change.

This is my first grow too!
 

jigfresh

Well-Known Member
I'm up watching the aussie open final. I'm not a tennis fan, but I am a sports fan and Federer v Nadal is classic. People say their last match was the best tennis match ever.

I've been working on my setup. Pics below. I cut the 6 holes in the top. I traced the bottom of a net pot, cut that out, then slowly cut the hole bigger, checking each time with the net pot. When I got it the size I wanted and pretty round, I traced it on a paper. I cut that out and used it to draw the circles for the other 5. I used a drill to make the little holes, then used a jigsaw to cut the big holes.

One cool thing is that there was a junction box in the closet. I had an extra gfci outlet around so I installed it. I'm going to attach the power strip to the wall. Just in case there is ever a spill I'm going to keep all power cords off the floor.

I've also been working on my light. I found glass from a cabinet that was in my house when we moved in. We got rid of it the first week we were here, but I decided to keep the doors for something. I'm glad I did. I'll upgrade my glass for next grow.

I cut the sheet metal down to size drilled little holes for the wire to go through. I strung 2 wires across to hold the glass. I also cut out the sides, but haven't fit the ducting to them yet. I made duct connectors by cutting out long rectangles of sheet metal and curling it around to make it round, then rivet.

I poured the hydroton in the pots to make sure I had enough, I was a little worried, but I have more than enough. I don't know if I needed too, but I rinsed it until the water was clear.

I also put my thermometer and ph/ppm meter on the wall. I'm going to calibrate it closer to when I get my RO filter. I'm going to make a little cover/ shade for the meters, so they don't bake under the light (before the plants hog it all).

About the cost estimate, I'm going with $1500 now. If it get's to $2000 I'm going to be seriously bummed.

My grow room is starting to look like a grow room.:hump:
 

Hulk Nugs

Well-Known Member
looking good man, im on for the ride make room for me :-P are you just going to have a flower/veg room or are they seperate rooms ? keep the pics comming
 

jigfresh

Well-Known Member
looking good man, im on for the ride make room for me :-P are you just going to have a flower/veg room or are they seperate rooms ? keep the pics comming
I got a front row spot just for you.

Because of money, I'm going to veg and flower in the same spot. I have a conversion MH bulb, and an HPS for now. After my first harvest I'm planning on getting a MH light and another DWC setup, fans... for mothers and clones. I'm hoping to put all that in the top half of the closet.

I'm going to see how this grow goes. Depending on how high I have to raise the light, that's where I can put the platform/ divider for the veg space.

Also, I am going to set up a cabinet or something somewhere else in the house to germinate seeds.

I've also been working the past couple days. My light is almost done. I had to run to ace to get some bolts and stuff. It is so nice to get everything you need and only pay $3.50. I used a strong tie to attach the socket to the light, and hang the whole thing with. I used a hacksaw to cut the slot in the metal to push the tie through. I drilled some holes in the tie and reflector. There are two bolts holding the tie to the reflector, then two eyelet bolts going through the tie and reflector for the chain to attach to. I also drilled a couple holes for the socket wires to go through. I used the metal tape to make sure there were zero air leaks.

I think that's it.
 

Hulk Nugs

Well-Known Member
very nice man ........... i was going to go get a cooltube or somthing like that ......at first i wanted to do what you did and just install my own glass in what i have but i was like aww fuk it just got buy the cooltube....but now i see yours i just gotta do it ......it will save me a shit load of money i can do somthing ealse with ........looking good man keep it up..........oh yea shit your in bigbear lucky fuk wish i lived up in the mountians im down in oc you got the mountians i got the beach
 

jigfresh

Well-Known Member
very nice man ........... i was going to go get a cooltube or somthing like that ......at first i wanted to do what you did and just install my own glass in what i have but i was like aww fuk it just got buy the cooltube....but now i see yours i just gotta do it ......it will save me a shit load of money i can do somthing ealse with ........looking good man keep it up..........oh yea shit your in bigbear lucky fuk wish i lived up in the mountians im down in oc you got the mountians i got the beach
dude, go for it. Make your own light. Just make sure it's good ;-) If you need any advise or anything let me know. Nothing helps you learn what to do and not do like trying. I've not worked with sheet metal too much, but it's sorta like fabric, just a lot more stiff. Plus drilling and riveting is slower than a sewing machine. I bet industrial companies have 'sewing machine' riveters. That would be a bad ass machine. Have you ever seen that show on discovery called "How it's made". Good shit, makes you think you can make anything with some work and a lot of tools.

Anyhow, I get my fan for the light on Friday, so that is when I can tell you how effective the air cooling aspect works.

The mountains are great. Lots of animals and trees. Plus I live in a house I'm paying mortgage on (not possible in oc/ la). However, things You can feel good about are: not having to wake up an hour early to remove ice from the 30 steps that lead down to the car for the wife. Unfreezing water pipes for 30 mins. when it's 20 outside and really windy. Waking up at 7am for 3 weeks as the forestry dept thinned out the forest (im spoiled I don't have to get up early). And I know there are parts of oc that aren't the best, but I bet my neighborhood is much more white trash than anything you got. It really sucks living so close to so many rednecks. I'm not trying to say I'm all that and shit, but I don't get in drag out fights in the middle of the street, I don't pass out drunk in my driveway, don't sell drugs out of the house, don't steal firewood....

Mountains nice. Great even sometimes, but not all they are cracked up to be.
 

Hulk Nugs

Well-Known Member
well yea depending on were your at up there ...... i want a cabin with lots of land ...... i would get pissed if i had to deal with that every day good luck man take a rip and turn the music up
 

jigfresh

Well-Known Member
take a rip and turn the music up
One night the neighbors a couple houses down had a band play the back yard. Honestly the worst band ever. They did have a good bassist. Anyways, my home stereo never proved it's worth more than that night.

I don't mean to rip on my mountains, it really is great living up here. I guess I just have to learn a new kind of patience or something. Thank God I'm only going to be here a couple more years. I'm probably the only person on RIU that is dying to move out of California. I want land too and I'm not going to be able to afford 2-3 acres here anytime soon. Having 1/3 acre is nice though.

As for the setup, I got my delivery of fans yesterday. 2 muffin fans (27cfm, 110cfm), and two 'regular' fans (for circulation). Pics below. I know someone earlier said the 27cfm wont be enough, but I think it might. Here's my worry with the 100cfm. I didn't buy the best thermostat, and so I don't trust it to immediately monitor the temp changes. With the 100cfm I think that if it kicks on at 80 or so, and goes off at 76, the lag time might cool the whole room to 65 (the temp of my incoming air). The 27cfm would change the temp slower allowing for lag in the thermostat. I think that I think too much.

I've also been working on my light. I've made the two 'ends' of the enclosure and am in the process of attaching them to the main reflector. After that will just be taping edges to make sure things are air tight.

My enclosure is turning out better than I thought it would. Anyone want to order one? :bigjoint:
 

jigfresh

Well-Known Member
Wow. Obviously I knew that the HID lights we all use were bright, but I had never seen one up close before.

DAMN.

My eyes are sensitive to light, and I don't think I'll be able to work on my plants without sunglasses. I may need to get some of those 'old people' glasses. The ones that are all super dark and go around your face. I'll be strait out of Boca.

Proper update coming later today with pics.

I've been busy trying to earn some money, to START THIS GROW. (move that bus)

peace fellas :bigjoint:
 

jigfresh

Well-Known Member
Yesterday they delivered my 400w hps ballast, my inline fan, and fan controller. Pics below.

I set up the ballast and the light works. The ballast doesn't get very hot so I think I will leave it in the room, instead of mounting outside and running wire.

The fan blows like hell. Not too loud either. Sounds like a small plane, not too big. I hooked the fan up to the light, not drawing cool air or anything, and I believe the plants will be able to get within a couple inches of the light.

I also cut a hole in my door to allow for intake. I mounted some pvc pipe to kill any light leak and also to draw the fresh air directly onto the plants.

I should get a check in the mail by Monday. That will cover RO filter, full DM supplements, and 6 clones.

I'm thinking of topping my plants when they start going. It seems like it makes sense that removing the main cola would make the plant distribute resources more than concentrate on one place. It seems that if you do it right, the only drawback to topping is longer veg time. Am I way off base?

Thanks for the patience guys. Actual growing of marijuana plants to begin within 2 weeks. I promise.

Last thing I forgot. One of the pictures is of the warning label that was on a bag, that wrapped up the fan controller. It reads: "...Do not use bag is cribs, carriages, or playpens." Wtf, what on earth would you do with a small plastic bag in a crib? I just thought it was kinda funny.
 

jigfresh

Well-Known Member
Thanks for the support guys. Things are almost there.

From the pics below you can see I cut an intake for the fan/ lights. I was going to run the ducting inside the closet, but realized that would take away precious screen space. So I just cut a hole high up and ran ducting low to pick up cool air.

I still need to cut my hole in the roof, something I was going to try today, but when I woke up this morning the world was white. So because of he snow and the 31 degrees I will be staying inside today.

I am trying out my light with a very sad house plant. We don't get much sunlight, being on the north face, so the plant may like having a little light on it.

I'll be ordering the ro, and supplements monday or tuesday.

Valentines day my wife had a great idea. She suggested that we drive into LA, where she can go to a museum while I go to the shop and buy some plants. Then we both get to have a Valentines day date that make us happy (nevermind we're apart).

Plants will be bought at LAPCG (los angeles patients and caregivers group).
 

jigfresh

Well-Known Member
Winter sucks sometimes. I had to take my wife to the airport this morning, which was a bummer because it snowed all night. I started digging at 4:45am. We got to the airport with no time to spare at 6:15am. I took a nap in a parking lot for a while.

On the way back up the mountain BOTH my chains SNAPPED. So I was stuck sideways (i slid) on a two lane road. The chains were (and still are) all tangled and wrapped around the driveshafts/ boots/ all that crap under there.

Thank God for Ian, the flatbed driver who looked rules in the face and laughed when he tied a chain to front of the little car. He drug me up the rest of the twisty little road after coaching me what to tell CHP if we got stopped. Only one time did I think we would both be stuck, and only one other time did I think I would slide off the side dangling by a chain (if it held).

Also thank God the chains did not slice the brake lines (thankyou thankyou thankyou). Being stuck with no brakes sounds even worse then not.

Needless to say, I don't think the Post Office is a place I will make it today. So no check. No ro filter. No nutes.

Fuck winter.:finger:
 

Hulk Nugs

Well-Known Member
awww looks nice to me :bigjoint: .......hope your dog is inside now hahaha take some rips and enjoy the winter it will be gone before you know it
 

thrawn

Well-Known Member
very nice setup mate. i have the exact same closet size and I like what you did with the pieces of wood, its something simple that can save you from a mess of duct tape and weather stripping. haha made me laugh seeing the hair tie around your wrist, assuming thats for the woman.
 
Top