Woomeister
Well-Known Member
Yes, I was writing mine at the same time probably! Im just trying to help the guy out with a method I have tried and tested and compared, got the t-shirt bla bla......agree to differ....bla bla
making hash on a small scale?
- Thread starter smokeh
- Start date
ok so once its boiled down pour rest of it through a filter over a sink or something. collect the stuff out of the filter and let it dry on a piece of cardboard.
think i got it.
thats for the info, ill be trying this method once my plants are done.
one more question thou, once i harvest my plants and seperate bud from crap. is it best to make hash out of dried cuttings or still wet?
greenpriest024
Active Member
Home-made hash
should help you out quite a bit.
that said, butane extraction is my personal favourite. my first time with honey oil had me literally on the floor unable to move
should help you out quite a bit.
that said, butane extraction is my personal favourite. my first time with honey oil had me literally on the floor unable to move
Woomeister
Well-Known Member
Personally I set up half a dozen pint glasses each with a filter in it, reason being sometimes the filter bursts and you lose it all down the sink!
Jointsmith
Well-Known Member
I've never heard of 'condensing' using heat so you'll need to explain this process to me.
The only methods I have heard of for hash either involve knocking the thrichomes off using friction (for example rubbing over a screen), lower temps below 4%C so the thrichs solidifie and fall off leaf (i.e. ice/bubble extraction), or waashing the THC off using a lipid substance which THC IS soluble in (i.e.butane extraction)..... None of these involve heat.
Post me a link to something explaining the condensing method and I'll read it.
greenpriest024
Active Member
just read properly through the water hash method that site mentions... nobody seems to give importance to freezing the weed before you do it. so go along with what the site says if that is your chosen method, but leave the weed in the freezer for the whole day before that, and instead of water prepare an ice bath (a bowl full of crushed ice and water - temp will be at 0 after about 20 min) and blend it together.
also, "window screen" will leave you with a harsh-tasting green pulp. buy 40 - 60 mesh wire screen to filter if you can, do a bit of research on the internet it can't be that expensive.
a friend of mine grows on a very large scale though and he detests water hash, so just bear in mind not everyone likes it...
also, "window screen" will leave you with a harsh-tasting green pulp. buy 40 - 60 mesh wire screen to filter if you can, do a bit of research on the internet it can't be that expensive.
a friend of mine grows on a very large scale though and he detests water hash, so just bear in mind not everyone likes it...
Woomeister
Well-Known Member
just going to fetch my little boy from nursery so will post you a link later!
greenpriest024
Active Member
whoops. read this post before my first one.
Home-made hash this should help. although i personally love the butane extraction for the end product it gives. monstrously potent.
Home-made hash this should help. although i personally love the butane extraction for the end product it gives. monstrously potent.
Jointsmith
Well-Known Member
Heat DOES affect THC potency, otherwise why aren't we all drying our weed using heat? Dry to smoke in 30 mins?.....not if you wanna get stoned.
Last edited:
berbonber
Well-Known Member
Use some sort of silk screen to collect the trichs, then when youv got enough (you can do this with a very small amount) cut a section of plastic away from a plastic bag, the ones with the seal along the top that youd probs get your weed in, this section of plastic should have on sealed side so youv got a piece that you can fold. put your kief into this and get a knife, heat the knife gently try pressing it on another piece of the same plastic it should sound tacky but shouldnt melt or warp the plastico once you got the heat right press it down hard on your kief packet and itl melt into one piece, let it cool and remove it fold it in half or quarters and repeat the process.
Pow theres your blonde hash trust me this is an excellent way to make your hash very controllable and you can see everything happening, i just made a few grams yesterday with the quarter of white rhino i got
Pow theres your blonde hash trust me this is an excellent way to make your hash very controllable and you can see everything happening, i just made a few grams yesterday with the quarter of white rhino i got
berbonber
Well-Known Member
like i say the direct heat might fuck the kief up, or the kief could melt to the knife or the pressing surface where it would be harder to remove than it would be from the plastic. they are just guesses as to why the plastic is needed though.
Sorry if i seemed like an arse in the other posts but trust me man its easy to do, you only need things that are readily availible its cheap and you can do it with small amounts
Sorry if i seemed like an arse in the other posts but trust me man its easy to do, you only need things that are readily availible its cheap and you can do it with small amounts
greenpriest024
Active Member
for some reason i cant post properly - i was trying to say, water hash methods are allright but nobody seems to mention the importance of freezing the Weed before doing this. The tutorial i linked you to is fine but just remember to leave the weed overnight in the freezer, then use water from an ice bath (a bowl with ice and water in it, should be at 0*C after 45 min) to blend the green.
