Moon Rock Oil

dwood8165

dwood8165

Well-Known Member
Hi all, I was just making some moon rocks. But I ran into a little problem with the oil. I used the RSO process which went ok. However, before I could coat the buds the oil stiffened up on me. I wanted to know how do I prevent that from happening? Or do I need to add something and if so, what?
I used Everclear for the extraction on a hot plate
 
FlyHigh589

FlyHigh589

Well-Known Member
I am indeed. Though when you say the RSO method, you are not saying the concentrate has any coconut oil or anything, correct? I’m assuming you used 190 proof Everclear and heated off the alcohol. As long as that is your finished product, then simply heat it up and it will absolutely liquify, as well as help eliminate some of the alcohol that remains in your product as without using a vacuum to purge, you will not be able to completely rid your product of ethanol.
 
dwood8165

dwood8165

Well-Known Member
FlyHigh589 said:
I am indeed. Though when you say the RSO method, you are not saying the concentrate has any coconut oil or anything, correct? I’m assuming you used 190 proof Everclear and heated off the alcohol. As long as that is your finished product, then simply heat it up and it will absolutely liquify, as well as help eliminate some of the alcohol that remains in your product as without using a vacuum to purge, you will not be able to completely rid your product of ethanol.
Click to expand...
I did not use anything other than the everclear. The Everclear cooked off and the concentrate became hard. I removed it from the heat thinking it will continue to become a solid which it did. I will try putting it back on the heat to liquify.
I do have a vacuum pump
Do you know anything about making good clean wax?
 
Fadedawg

Fadedawg

Well-Known Member
dwood8165 said:
I did not use anything other than the everclear. The Everclear cooked off and the concentrate became hard. I removed it from the heat thinking it will continue to become a solid which it did. I will try putting it back on the heat to liquify.
I do have a vacuum pump
Do you know anything about making good clean wax?
Click to expand...
It should melt above around 115F and be like a syrup.

As a note, the buds that we coated ended up extremely harsh to smoke. I've found concentrates are best vaporized instead of combusting.

If Ethanol is your solvent of choice, may I suggest the QWET process for a good clean concentrate?
web.archive.org

QWET Extraction With Ethanol

Quick Wash Ethanol, also know as QWET is one of the techniques commonly employed to extract oil from cannabis. Here is skunk pharm’s QWET formula to produce an absolute using a 3 minute quick wash.…
web.archive.org web.archive.org
 
dwood8165

dwood8165

Well-Known Member
thanks for the tip. I do have a extraction tube. But i feel the bh is a little more dangerous . but it can be done
 
You must log in or register to reply here.
Top