Roseman's DIY Bubbleponics Tutorial

Roseman

Elite Rolling Society
IF I ignore you, it might be because you ignored this:


QUESTIONS will be answered here about YOUR Bubbleponics grow:
Questions about Bubbleponic Growing Thread
.

Ask me anything you want to here, about this grow.

PLEASE DO NOT HI-JACK THIS TUTORIAL.


PLEASE DO NOT POST YOUR GROW HERE.

PLEASE DO NOT USE MY THREAD AS A CHAT ROOM FOR YOUR DISCUSSIONS.

I am trying to replace my 1500 page thread with this thread so it can be read and used more often as a source of reference.

I really appreciate your consideration.
 

MostlyCrazy

New Member
I would imagine that would hurt, Rose but remember these are weeds we are growing and the plant will figure out how to recover and probably regrow the missing parts in some way, shape or form. I'm sure by lsting into the inadvertant hole you have recovered some of your lost production. Still makes you feel bad and I'm sorry about that.

I was playing with my seedlings today and literally just touched a seedling leaf and it broke clean off at the base where the stem met the root. Really pissed me off and that takes a lot under the influence. A couple more tokes and I realized I learned something valuable for the price of replaceable seedling. Don't touch the seedlings (especially while stoned) and leave them the frig alone! Like I said, I'm a hands on gardener but in this case discresion was required.
 

Sidewinder73

Active Member
Hey Roseman, I am running a dwc hydro setup (pc grox box). I have Fox Farm's Big Bloom and Grow Big and also Tiger Bloom. I was wondering if you think this is sufficient or if I should have some micronutes on hand? Have you or anyone had success with these nutes in this style hydro system? Thanks.
 

Roseman

Elite Rolling Society
Feeding Without a PPM Meter

I did half a dozen grows without a ppm ppm meter, enough that I do not rely on it now that I do have one. You have to just use common sense.
I often read "you need a 1200 ppm nutritonal solution
during VEG". Well, how does that 1200 ppm take into consideration what the ppm of my plain water is? If I have 7.6 pH water out of the faucet, and it is 100 ppm out of the faucet, and I add a half a teaspoon of pH Down and now it is 200 ppm, do I just add 1000 ppm of nutes? What if I use Distilled water that is 6.0 pH and 20 ppm, do I add 1180 ppm of nutes? And the person, book or chart that recommended the 1200 ppm has no idea what nutrients I am using to start with, whether they are high ppm chemical solids or low ppm liquid organics.

Again, you have to just use common sense.


When it is time to start the first feeding, you will see the seed germinate and show you the first two round leaves. Disregard them, and after you see 4 new leaves, start 1/4 dose of recommended nutes, for 6 small sprouts in the tank. After I see a total of 8 new leaves, I add 1/4 dose again. I want to be cautious not to get nute burn by over feeding. I wait two days and add a 3rd 1/4 dose, and wait two more day, (usually the 7th to 9th day, and add the last 1/4 dose, looking at plants that are little bushes about 4 inches tall.
AFTer 7 to ten days later, I Drain and Replinish with a full packet or full dose of nutes.
By then, they are drinking half a gallon a day, and EVERY OTHER DAY, I add 1/6 packet when I add a half gallon of water. Then, after two weeks, into the 4th week, I am seeing them drink a full gallon daily, and when I add a gallon back, I add 1/6 packet. I watch the tips and if I see any yellow tips on the upper 1/3 of the plant's leaves, (not the lower ones) I skip two days of nutes. I stay on the schedule of adding 1/6 every day to every other day, depending on if the six plants drink a full gallon. After about 5 weeks of VEG, I am adding 1/6 daily almost every day, but ocasionally skipping a day.
Then I start 12/12, the Flowering Cycle. . I stay on VEG nutes for two days and start replacing them as they are eaten and drank with the BLOOM nutes, adding 1/6 packet daily.

WHEN I remove 3 males, and only have 3 female plants remaining, I back off and reduce feedings. It is just common sense. 3 plants eat less and need less than 6 plants.
If and when I have 3 large plants, say over 18 inches tall, I can still feed a full packet. I adjust the nutes to the number of plants and size. After I have some larger plants, say over 24 to 26 inches tall, I might add a packet and 1/6 extra, and watch them closely. If I see yellow tips, I remove a gallon and replace it with plain water AND skip two days of feeding.
UNDERFEEDING is much better than OVER FEEDING.

AFTER A WHILE, YOU JUST GET A FEEL FOR IT, watching for those yellow tips. Again, it is better to under feed, than over feed.
IF you have some giants, like 3 Flowering, add a little extra and watch them closely. If you only have two plants, do not use a full packet. It is just common sense and getting a feel for it.
 

Roseman

Elite Rolling Society
you are are only considering? :shock: ;-)


QUESTIONS will be answered here about YOUR Bubbleponics grow:
Questions about Bubbleponic Growing Thread
.

Ask me anything you want to here, about this grow.

PLEASE DO NOT HI-JACK THIS TUTORIAL.




PLEASE DO NOT USE MY THREAD AS A CHAT ROOM FOR YOUR DISCUSSIONS.

I am trying to replace my 1500 page thread with this thread so it can be read and used more often as a source of reference.

I really appreciate your consideration.
 

Roseman

Elite Rolling Society
I would imagine that would hurt, Rose but remember these are weeds we are growing and the plant will figure out how to recover and probably regrow the missing parts in some way, shape or form. I'm sure by lsting into the inadvertant hole you have recovered some of your lost production. Still makes you feel bad and I'm sorry about that.

I was playing with my seedlings today and literally just touched a seedling leaf and it broke clean off at the base where the stem met the root. Really pissed me off and that takes a lot under the influence. A couple more tokes and I realized I learned something valuable for the price of replaceable seedling. Don't touch the seedlings (especially while stoned) and leave them the frig alone! Like I said, I'm a hands on gardener but in this case discresion was required.
Good Point I forgot to mention, MC.
 

Roseman

Elite Rolling Society
Well lets hope thats all the males u get.

Thanks, xpac, I do hope, but I had 14 plants and I expect 7 of them to be males. I have 4 DEFINITE FEMALES that I am sure are females. It is much easier to be sure of those two little white hairs than to be sure of a calyx. I had a calyx that looked like a male nut, then the next day, it had two hairs in it. I am patiently waiting, to be absolutely sure.
 

imsolost22

Active Member
Hey man this is the most helpful thread i've seen. Thanks a bunch. :mrgreen:
I also have a question about ur DIY bucket, does it provide enough room for 3 blooming plants? They look a little squished, not much light can be gettin in there.
Ur plants are looking beautiful btw.
 

x420xTeXaN

Well-Known Member
once again i could use ur wisdom good roseman sir.... can you keep aneye out on my second grow i currrently have above my sprouts are 4 23watt 2700k and 2 42watt 6500k good start i might have to restart anyways i have two bagseeds left and i have some master kush seeds on the way so should i wait for the better genetics to come in ..... i would like to successfully grow 5-6 plants this time and 12 plants next time and stay there... any help would be appreciated... OOh top notch detailed setup you single handed got more ppl to attemt a grow with this... great educational value
 

Roseman

Elite Rolling Society
Hey man this is the most helpful thread i've seen. Thanks a bunch. :mrgreen:
I also have a question about ur DIY bucket, does it provide enough room for 3 blooming plants? They look a little squished, not much light can be gettin in there.
Ur plants are looking beautiful btw.
The 5 gallon bucket is NOT enough room for three bloom plants. It is enough room for TWO. It is enough room to start three seeds that are not feminzed, and then remove one or two males.
 

Roseman

Elite Rolling Society
So far, I have removed two males, but not really 100% totally and entirely removed them. It is too difficult to remove one at a time.

As I find a male, I cut the top 2/3s of the plant off, leaving the stalks and roots. AFTER I "sex" all of them, (determine the sex) then and only then do I remove the roots too. I see no reason to rush, and I want to know what the plant next to the male is, before I remove it. It is just easier to know what they ALL are first, before removing any of them.
 
Top