The Chinese Quantum Board Knock Off Builds

Airwalker16

Well-Known Member
UV and deep reds can be turned off on the board I bought above. I will only use them in flower. The do have other boards, but this is the one I went for and my plants are loving it. :)
God... As I type this, I'm waiting for yet another attempt from Jerry at Good ol' KingBrite to do his best at explaining how the Fuck this works. I'm so curious how these boards are wired internally so that when you flip OFF the switch, the HLG-***H-54A driver still works. Is it as if the reds/ir/UV are on a completely separate Board and the switch acts as if you were just re/disconnecting the board from the driver on its own parallel circuit? Do they have them wired into the board internally on their own in series/parallel so they equal the 54ish volts?
 

Airwalker16

Well-Known Member
Thanks @Oldskoolsmoker My thoughts were the less on board chips the less to go wrong. As well the other chips FR, UV could be robbing some of the power?? I understand that in the right combo the FR causes the Emerson effect but too much can cause shade avoidance. THis has always made me nervous, as I use FR in my current setup to put plants to sleep.

How about spectrum. 4000K, 3500k,3000k It was thinking 3500 or 4000k. My buddy does have a slight height requirement so I was thinking those spectrum's may help with node spacing. Any input or experience with those spectrums. Buddy's space requires multiple 240 kits.

Money is tight and canadian dollar sucks. I think my friend is gunna be happy coming from viper spectra to an affordable solution.
I'm pretty sure you can get boards without the 730nm.
 

daveybc

Well-Known Member
After navigating their site I see the picture better. Yes there are several configurations i see. I will think about ordering the kits or just building. Nice they have the boards and heatsinks too that can be ordered seperatly. I have always liked single heatsinks with angled aluminum. It allows for versatility on design.

Still not sure on the IR or UV. I was thinking cree rather than epistar.

I'm pretty sure you can get boards without the 730nm.
 

Airwalker16

Well-Known Member
God... As I type this, I'm waiting for yet another attempt from Jerry at Good ol' KingBrite to do his best at explaining how the Fuck this works. I'm so curious how these boards are wired internally so that when you flip OFF the switch, the HLG-***H-54A driver still works. Is it as if the reds/ir/UV are on a completely separate Board and the switch acts as if you were just re/disconnecting the board from the driver on its own parallel circuit? Do they have them wired into the board internally on their own in series/parallel so they equal the 54ish volts?
He can't explain it to me. Too much of a language barrier I think.
 

Airwalker16

Well-Known Member
Sounds like that's exactly how it'd work to me. Flip the reds on and you'll lose a little bit of power to your white diodes.
Well I learnt that they use exclusively CV drivers so it must be that the reds/ir/UV on that switch equal to 54V however they're wired so when they're off, it just puts that current to the sammies.
 

daveybc

Well-Known Member
I sometimes think more isn't always better. But it sounds pretty dope if all that spectrum was done well. Its tempting going for the added FR and UV. As I mentioned these are for a friend so it would be nice is this was solid board. I would want problems. It would be great to know how they wired the internal works for the switch though. Perhaps doesn't want the secret leaked to USA..

Well after looking and finding specs and navigating ali's messed site its making sense. I see the spectrum charts show a spike in the red with cree vs epistar. But it looks as if the blues dip a bit more with the cree as well. Ill spend some time looking and perhaps send an email. Would Jerry be the best to get a hold of?

He can't explain it to me. Too much of a language barrier I think.
 
Last edited:

Moflow

Well-Known Member
I've had great success with the R2T 512 diode boards 91 cri
I call them Disco Boards lol
No switches for separate channels, just all on or all off.
Personally, I don't see the point of the on/off switches as the Sun doesn't have one and plants grow very well with sunlight!
I think @nachooo runs uv from vegging through to flowering with great results.

R2T was one of the first companies to offer the option of the extra uv, 660nm + 730nm on a single channel board.
I use them for flowering but they'd veg well too.
I haven't had any issues with them, I've had them nearly a year and a half now.

Here's some nice looking strips too.
Rock Board, 950mm x 70mm. Around 86 cri
At last, someone making a 3ft strip. They'd be great for a 4ft x 4ft area.
2ft and 4ft strips are a tight fit in a 4ft x 4ft tent.
 

Lilmink

Well-Known Member
I've had great success with the R2T 512 diode boards 91 cri
I call them Disco Boards lol
No switches for separate channels, just all on or all off.
Personally, I don't see the point of the on/off switches as the Sun doesn't have one and plants grow very well with sunlight!
I think @nachooo runs uv from vegging through to flowering with great results.

R2T was one of the first companies to offer the option of the extra uv, 660nm + 730nm on a single channel board.
I use them for flowering but they'd veg well too.
I haven't had any issues with them, I've had them nearly a year and a half now.

Here's some nice looking strips too.
Rock Board, 950mm x 70mm. Around 86 cri
At last, someone making a 3ft strip. They'd be great for a 4ft x 4ft area.
2ft and 4ft strips are a tight fit in a 4ft x 4ft tent.
What do the prices run for the 512 board you got ? Prices aren't listed
 

Moflow

Well-Known Member
What do the prices run for the 512 board you got ? Prices aren't listed
You'd need to email Russell and ask for a price for the boards on their own. I got them nearly A yr n a 1/2 ago now.
I just checked, per board edited there. I payed £45 a 512 disco board
A QB288 is around £63 a board
 
Last edited:
Sorry just got back on,

I paid $345 US for the board, and $75 US for shipping. Canadian Duty was $43.


Sorry guys, but I am new to this stuff. lol I have grown outdoors but don't like the issues with bugs, neighbors, the fuzz and so on.
My son had bought from KingBrite and then I did as much reading on Quantum boards as I could. I wanted the lights to be dimmable without having to remove a drive and turn it over to do it. So many people seem to be happy with the lights, and I watched a video from Dr. Bruce Buggbee about how important far reds are in the flowering stage, and the extra trichome production and denser flowers that can be produced while using them in flower, and bingo... I saw this board, it was new for 2020, in was in my budget so why not. The covid19 and the shitty Canadian dollar made me buy it. lol
In a 4x4 tent hung 30" about the canopy, I am running around 77 degrees, 41 percent humidity and have a single fan above the light facing a wall to gently blow the leaves. And I have a 6" Infinity inline fan running at 2 power.

Hope its okay to post a link

 
Last edited:
I have a question. I am getting ready to wire 4 QB11's in series and can't find any info on them. Each strip has a positive and a negative on each end.
I assume they wire similar to the 288's?

Thanks in advance, I think I know what I'm doing but would rather not burn my house down.
 

GBAUTO

Well-Known Member
I have a question. I am getting ready to wire 4 QB11's in series and can't find any info on them. Each strip has a positive and a negative on each end.
I assume they wire similar to the 288's?

Thanks in advance, I think I know what I'm doing but would rather not burn my house down.
This has some info on how they suggest you wire them.
 

bigmikey86

Well-Known Member
Thanks @Oldskoolsmoker My thoughts were the less on board chips the less to go wrong. As well the other chips FR, UV could be robbing some of the power?? I understand that in the right combo the FR causes the Emerson effect but too much can cause shade avoidance. THis has always made me nervous, as I use FR in my current setup to put plants to sleep.

How about spectrum. 4000K, 3500k,3000k It was thinking 3500 or 4000k. My buddy does have a slight height requirement so I was thinking those spectrum's may help with node spacing. Any input or experience with those spectrums. Buddy's space requires multiple 240 kits.

Money is tight and canadian dollar sucks. I think my friend is gunna be happy coming from viper spectra to an affordable solution.
Spectrum wise it all depends on what you’re after. I went with King Brite for my veg and flower setup and I couldn’t be more pleased. I went with 4000k for my veg set up and 3000k w/ Cree 660 for my flower setup. I run my FR spectrum in the form of four QB11 strips on a separate dimmable driver. I planned to add some of the blue spectrum into the flower tent with some QB11 strips but at this point in time I’m waiting on some UVA/B T5 bulbs that include the desired spectrum range that I’m after. Two birds with one stone.

Nothing but solid experiences with KB
 
WOW another Chinese light thread. I've been going through these for days on various forums/chats lol. I'll start off by saying my name is Brad and I AM looking to buy a Chinese light because I am cheap and this is my first grow. I currently have a Roleadro 1000W LED from amazon. I'm growing 2 plants in my closet right now which is about a 2x4' space. I will probably upgrade to a 3x3' tent for my next grow. so far I have been recommended 2 different lights by people on other forums/chats. Am I allowed to share links for your opinions?
 

christopher jordan

Well-Known Member
WOW another Chinese light thread. I've been going through these for days on various forums/chats lol. I'll start off by saying my name is Brad and I AM looking to buy a Chinese light because I am cheap and this is my first grow. I currently have a Roleadro 1000W LED from amazon. I'm growing 2 plants in my closet right now which is about a 2x4' space. I will probably upgrade to a 3x3' tent for my next grow. so far I have been recommended 2 different lights by people on other forums/chats. Am I allowed to share links for your opinions?
Go right ahead Bro.
 
Go right ahead Bro.
Awesome thanks. So here I have it.

SO I got full pricing from 2 diff manufactureers and here it is.

https://www.alibaba.com/product-detail/Samsung-Diodes-MeanWell-Driver-IR-SF_62458097092.html

I can get this light for $222 (sf2000- 3000k+5000k+660nm+IR 760nm)




or this kingbrite for $185 (3500k +episatr 66nm UV IR)

Are either of these good options or should I be considering another style/board? I'm 100% open to suggestion as long as it's based somewhat on experience.



Quote
 
I posted but it's waiting on moderator approval so I'll just say it here as we wait. One is essentially a SF2000 (3000k+5000k+660nm+IR 760nm) and one is a Kingbrite 3500k+episatr 660nm UV IR

Not picky on what I get just looking for suggestions hopefully based on experience lol.
 
Last edited:
Top