The Daily Nugg,
- Thread starter Indacouch
- Start date
FresnoFarmer
Well-Known Member
Need to get in here and clean up the lowers.
Dragonfruit
Sour Deisel
Shoreline OG
GMO X Chem 91
GG #4
Dragonfruit
Sour Deisel
Shoreline OG
GMO X Chem 91
GG #4
I have used Jiffy Pellets. I left the net on the pellet and surrounded it by hydroton. I also kept my pump in a bag so no solids would get into it. I hate to admit that because I'd feel really guilty if someone lost a pump doing what I did.
6 weeks
Those are some healthy looking plants!
SSGrower
Well-Known Member
I have been trying ro find a more elegant solution to that issue but it seems to me the damaging particles are the fine ones from the clay which require a filter that on my "cheap" pump would restrict flow too much. Certainly if I had hundreds in the pump I'd be more concerned. I just rely on the built in filter.I have used Jiffy Pellets. I left the net on the pellet and surrounded it by hydroton. I also kept my pump in a bag so no solids would get into it. I hate to admit that because I'd feel really guilty if someone lost a pump doing what I did.
6 weeks
Laughing Grass
Well-Known Member
I had three more so I tried scuffing them up and soaking for 36 hours we’ll see how that goes. Honestly I don’t have a lot of faith. Some towels had fallen behind the freezer today and when I climbed behind to get them I also found all my missing seeds! I was looking for them for weeks, I last saw them when I started the auto in May. I’m soaking three critical + 2.0 as well, that’s what I intended to grow this time.
Last edited:
Laughing Grass
Well-Known Member
I’m going to make the scrog frame out of 1/8” flat steel rod with eyelets for tying off the screen. I am planning one 3d printed solution. I really dislike how the screen isn’t connected where the strings overlap. Especially on a string that goes over so when you tuck the plant you don’t get the resistance of the intersecting string. I’m going to make these little clips that are 1cm square to attach at all the intersections where the string goes over.
I’m high af and none of that probably made any sense, but it’s going to be awesome!
SSGrower
Well-Known Member
I laugh because I always find the last bottle of vanilla at the grocery cause its in the way back on the top shelf. I am guessing they were on top of the fridge, something got slid up there (the towels probably) by a verrically challenged individual. LOL as I bump my head on the doorway.
SSGrower
Well-Known Member
So instead of weaving or twisting the strings to get the resistance you just put those where needed? Or at every intersection?
Laughing Grass
Well-Known Member
I’ll still weave the strings. I’ll probably just put them on when I run into situations where it’s needed. I, borrowing a form 3 sla printer that can print an entire tray faster than mine could print one piece. I’m trying to think of things to print while I have it.
Grandpapy
Well-Known Member
Can you print a net?
I was thinking use those steel rods for a small net, if you wove those there would be little give at the intersections.
BudmanTX
Well-Known Member
BudmanTX
Well-Known Member
Nice, props man.....
Laughing Grass
Well-Known Member
It would have to be modular in 300x300mm sections and would have to be overbuilt to have the necessary strength.
That's not a bad idea. I was was also thinking about using three individual screens so I could adjust them independently and possibly grow three different strains. I should make a trip to the craft store and see what type of metal strips they have in stock.
I appreciate it. I'm lucky that I live so close to true north seedbank. I think I've gotten every order from them within two days of ordering.
jerryb73
Well-Known Member
Love the avi lol
BudmanTX
Well-Known Member
lol....like that...props to MrsBudmantx for finding it
Azn00Superman
Active Member
Copycat genetics True Chocolate S1. Hasn't been cured yet but I love it already. Pure gas.
Attachments
Welcome to RIU.
Azn00Superman
Active Member
Thanks