The Perpetual Beach...

Samwell Seed Well

Well-Known Member
So i flipped yesterday do today is day one..

And we did it all lazy, drainage is in but the tables(were in the flood) will have to be cleaned in room once drainage is all connected. We have zerotol for that
20220113_132629.jpg

Raunchy Runtz
20220113_132143.jpg

Sonic chronic
20220113_132148.jpg

As soon as tables are in and clean I will be splitting the plants onto 3-4 tables in groups of 60-80 based on size.

Waiting on tags so Sonic Chronic have its on tables and RR its own 2

Trellis structure will be created out of angle iron in the next few days and attacked with either clamps or zip ties(for the time being)
 

Samwell Seed Well

Well-Known Member
The pancakez,aficionado seeds, runt(description of its growth) isn't so happy...it will grow out of it , just low feed for a bit
The odd duck
20220116_121543.jpg
It's more succesful twin
20220116_121546.jpg
 
Last edited:

SoD4nk

Well-Known Member
We cleaned , buffed and epoxy them. Still have one room to do. But we have been using it as the construction area till this week.
Buffed as in sanded it? I'm curious because I ripped up carpet in my basement and it's just some glue here and there... Was wondering if I can just epoxy over it or quick Crete over the existing basement concrete. Do u have any advice?
 

Samwell Seed Well

Well-Known Member
Buffed as in sanded it? I'm curious because I ripped up carpet in my basement and it's just some glue here and there... Was wondering if I can just epoxy over it or quick Crate over the existing basement concrete. Do u have any advice?

We used a degresser with a floor buffer and buffed/degressed the floors, then we used an acid etching product that came with the epoxy kit to acid etch/clean the floor.

Once that was all cleaned up and we re-mopped and vacuumed clean, we put down non sag floor cualk/sealer on any cracks or groves from settling or cutting.

Then we primersed then we epoxy. Epoxed took about 3-4days to harden after application, clean air flow and dehumidifiers helped.

We are pretty happy with the look. Only thing we would do different is make the epoxy thicker. Remove more acid etching compound as plates where we didn't remove as much we are seeing some chipping and we will have to got over it again when we epoxy Bloom 2
 

Samwell Seed Well

Well-Known Member
So did some stripping in veg now that these little plants are a week into the delta blocks from clone dome
20220117_181450.jpg 20220117_181435.jpg
20220117_181440.jpg
BEFORE
20220117_134158.jpg
and we got the water line split to give the grownix a dedicated line and allow me to isolate and utilize the fresh water system for feed to being to run feed in every room from one room. Fuck ya.
20220117_173548.jpg
 

Attachments

Samwell Seed Well

Well-Known Member
What do you think of those thinkgrow leds? Do you have the Trolmaster Hydro X Pro controller? If so whats your take on that as well?2
The think grows are pretty amazing haven't flowered with these H models yet but they are doing a great job in propagation area.

I don't have the touch screen trolmaster controller, but the basic hydro X and I like it alot. Literally can do it all with upgraded modules, which is a pain but not really.

Money all goes somewhere and keeping a theme has intentional and unintended benefits
 
Top