Get the area ur unit is in cold as fuck, you should be able to get down to around 9’c with the dehuey running full blast, the biggest loss of terps happens right at harvest imo, hanging it for a couple days is only gonna lead to a huge loss in myrcene
So you are using the fridge to dry with no hang drying? I am so worried about mold , but what you're saying makes sense
Yeah that was always the idea when I built it. I did worry about mold too, I won’t lie, but I packed 15oz into mine the first time I used it and it was all perfect, game changing actually.
That bud looks fantastic
I don’t seem to have the pcb with the LEDs in the back of mine. Koolatron may have made changes to the power supply, is it the same model? It shouldn’t make any difference unless you’re putting it in a grow room or something. Anyone else have LEDs in the back of their units?
after the bud is dried do you store the crop inside the koolatron, inside grove bags?
I pull out of the koolatron once it is stabilized after a couple weeks normally. I recently just consolidated jars and put it all into Grove Bags and heat sealed them.
I dont think it'd hurt. Matter of fact, that's a selling point for the Cannatrol. I just ran out of room in the Koolatron so I pull it when it's ready for jars/grovebags.
I've been moving my dried bud from my freeze dryer to my Koolatron for rehydration, stabilization and storage. The two, so far, are working very nicely together. But I've been storing weed in mine for several months and love it for that.
I will leave buds in the koolatron until I need to harvest and start again usually. I will then move the buds to grove bags and store them in a different wine fridge I have. It’s not thermoelectric but once they are sealed in the grove bags I don’t think it matters as long as they are kept cool and dark. I think keeping the grove bags between 50-60f and in the dark helps keep them longer, just my opinion on that though.
That is what the inkbird is for. You can probably hack another controller but I'm not familiar with that one.
but there's no need to hack, AC Infinity sells 120v outlets that connect to the controller. The DeHu can be plugged into one outlet and the Wine cooler can be plugged into another. These are then connected to the AC infinity controller 69 via UIS (basically USB-C) and the Controller 69 can set high/low temp, high/low humidity and control the slope. They basically cost $100 bucks. A LOT of growers use these controllers for their grow tents.
