Which diode is better

Trickyticky

Trickyticky

Well-Known Member
PJ Diaz said:
Depends on your environment (LED grows should be warmer than HID), but in optimal conditions, yes. Personally I would exclude the IR and FR from the board, and supplement that separately on different timers. I don't like my IR or FR running all day long.
Click to expand...
I thought qb ran cooler than hid ?
 
PJ Diaz

PJ Diaz

Well-Known Member
Trickyticky said:
I thought qb ran cooler than hid ?
Click to expand...
I mean you want your environment warmer in LED grows than you would with HID grows. So if your environment is naturally cold, you might end up using energy to heat it up to get it to temp for LED. If your environment is naturally warm, you are right on target. For me, it's getting cold here, so I'm about to bring out my HPS for a couple months.
 
H

HippieDudeRon

Well-Known Member
tilopa said:
These strips that you linked are not comprised of lm301h diodes. The series name is 'H' but that has nothing to do with lm301h diodes. Their efficiency is significantly less than lm301h, they state they are 159 lm/w or 2.7 umol/j, whereas the lm301h are 220 lm/w or 3.10 umol/j.
Click to expand...
As has already been pointed out by PJ, they are 301H diodes. And is stated in the data sheet. ANd are the only 301H strips from samsung.


301B's come in Q series strips and H influx industrial strips from samsung. And are all, white no reds.
tilopa said:
OK. I wonder why the efficiency is so much lower. Maybe their stated efficiency for the bare diode is potential or something?
Click to expand...
301's don't hit your stated figure very often, and that stated figure is at 25c temp and 65ma drive current on the top bin of 2 cct's(originally just 5000K but now some 4000K 70cri's) and is not even available to order to most people oro even companies. Epi yields just don't support it...but sure "it can be done" in the lab and is great for marketing.

Thos strips are binned at a current that is not 65ma...as well as have red 660's mixed in too. those 660s make the LPW take a big hit as they are not very efficacious lumin wise.
If you compare apples to apples driver current per diode the strip would be more efficient with the addition of the reds and their photon weight. Even with small losses going from spec sheet to actually on a board.
 
Last edited:
Rocket Soul

Rocket Soul

Well-Known Member
tilopa said:
OK. I wonder why the efficiency is so much lower. Maybe their stated efficiency for the bare diode is potential or something?
Click to expand...
Iirc those strips are white + red which means less lum/w cause of the spectrum. The ppf of 2.7 is nominal of tge strip, running somewhat harder than nominal of the 301h.
 
You must log in or register to reply here.
Top