Search results

Anyone have any solid info on wtf this bugger is? Mixed up some soil started repotting clones and flung this guy onto one of the plants roots cluster. Freaked out trapped it in a cup. It buries itself in the dirt and flys around the cup.

Fixed sorry for the distracted sloppy post folks.

2 inch wide

What is going to give better heat dispersion, a 1/8 inch thick aluminum U channel 2 1/4 inch wide with 7/8 leg 46 inch long or a 2 inch wide 1/4 inch thick 46 inch long aluminum flat bar? I will be running 10 Samsung F series gen 3 running each at 1.3 amps may push it up to 2.5 amps down the road.

What do you mean a stiffener??

So ive gone pretty hard ive got ten of the double strip 3500 k coming and two 320 watt drivers. So if running at 300 per driver each led will be at 60 watts. So with any aluminum channel will my ambient temps in the tent stay reasonably low?

Aluminum channels?

You think these will run to hot for tnutz?

So just do the effin 2 inch heatsink usa and go in on this lol

Would you buy the heatsink usa heatsinks or any other good options?

I just pulled the trigger on the fs. It was 350. 70 dollar difference. Figured if im desperate for a separate lights some day could pull 4 off and throw em on a another driver. But will have a bad ass light for now. I really appreciate all your grear advice.

How many would you put over a 4x4? Is 10 worth the investment? I figure 6 would do it but digikey discounts them at 10 and would keep light temps down to spread the amps.

Are the double row strips worth the cost difference from the single?

What size pymp do you run?

Thanks for the thought! So im looking for two of these and the lights run parallel. https://www.trcelectronics.com/View/Mean-Well/HLG-320H-48B.shtml?gclid=Cj0KCQjw-r71BRDuARIsAB7i_QPOLNwnZkGVhxk-p_yDjJaOqly5pEmTqqkrtxprYg0tfr42D_xz-LcaAkyuEALw_wcB

Been planning on a new light for a 4x4 tent done some cob builds but first strip build. Ive been thinking of using 10 f series strips with 2 HLG-320H-C1400B will this work? Anyone have a better ideas on a driver a arrangement without an arm and a leg? Thanks for reading in!

I did wait until most of the pistils were orange but honestly am still afraid I harvested a little early. Still have some giant buds thoufh. they're hanging and smelling like hay. I only did a partial harvest to let smaller buds develops so I'll let them go abother week or so. I cut the tops...

The largest nugs will probably lean in towards the light once the branches get to tall to train down further. Let theme grow from the walls towards the middle alone then pull them back towards the walls to expose the center the to light.

Thanks you so much for them props. First go around growing bud, grown all organic under led. Honestly didn't expect to be so successful on the first grow. All clones are looking better than mothers ever did. Now it's on to buying some known genetics and giving away the bagseed strain unless it's...

Thanks for the advice everyone I thought I saw a couple amber in there so I was a little over excited lol. The bottom bugs are still definitely forming so wanna get the top off soon to lower the lights. Pictures were taken with a 40x lense for a phone.