wavey.mofo
Active Member
This is very helpful, thanks a lot man!!!
101 Already Asked Questions
- Thread starter Widow Maker
- Start date
greatstrain
Member
isnt this 101 asked questions? i see 21 -_-
Ross Fisher
Member
nice one,cheers for the info!
TardyMarty421
Member
good one! thanks!
statictree
Member
I have a ? for widow maker. I have a 5 ft wide 2 ft deep closet. its all white. will a 4ft 2 bulb t5 with 4 35watt cfls, 2 cfls per 10inch reflector on a y socket be enough light for 2 plants. the t5 has 10,000 lumens and the 2 bulb cfl set ups each have 4,800 lumens. with proper kelvin scales wouls this be enough. im looking at putting the t5 across the top and one 2 bulb cfl setup on each end. its going to be about 19,000 lumens for about 250 watts. or should i go with the 250 watt MH/HPS set up. there both going to cost around the same. im just worried about a fire when im at work for 12 hours on shift work. will it get to hot in my closet. thank you for any help.
i have a noob question ... when you say to use neuts with NPK 20-20-20 ,in what unit of measurement do you count those numbers?
i'm asking that because i bought some universal neuts with NPK 3:2:3 ...so should i use like 10 times more ?
i'm asking that because i bought some universal neuts with NPK 3:2:3 ...so should i use like 10 times more ?
killa killa kk
Member
I also have a noob question.....I want to post my grow journal im making public so people can leave comments and can be seen in the main page. What do I do?? not sure how to make the link or move it all over from my journal?????
k3nz1387
Well-Known Member
im sure its after the 3rd set of true leaves or 2 weeks from seedling breaking soil.
check this out : http://en.wikipedia.org/wiki/Cannabis_cultivation#Seedling_phase
Chicago Gooner
Active Member
I have four seeds in the soil for over four days now and still nothing. It took a little over 2 days to germinate, now over 4 in the soil and they're not sprouting. Should I be concerned? I have these in the plastic cups, standing on top of the water heater. All seeds from legit bank, feminized. Thanks for the help. 
anyone ..? plss
BakedBlake
Well-Known Member
Many of my questions were answered. thanks man!
i have like 3-4 tent questions all relating to ventilation i feel like an idiot when it comes to ventilation
would it be possible to run a duct from the air conditioning vent on the cieling into my tent? I mean i know its possible but what if i taped up like half of the vent for the duct and left the other half open for the room would the air actually make it into the duct or would it just flow into the room or would i have to tape up the whole thing
seperate question
lets say i have a 4 inch inline fan and i want to use it to cool my light with no carbon filter. where does the ducting start for something like that?? like duct to fan to hood to out of the tent? and where is that inline fan drawing air from? or is it pushing the air into the hood and out of the tent. could i see a 4-6 temp decrease in something like that? im just not sure how to hook up a 4 inch inline
seperate question
lets say i have a 4 inch inline with carbon filter and air cooled hood. so it starts from the carbon filter then ducts to the fan which draws air/notsure? out of the carbon filter to duct to hood to out of the tent? if thats how it works how does the carbon filter keep the smell out if its just venting the hood?
seperate question
here is my hood there is 4 notches it looks like around where i can duct something. is that made for an attachment that I have to buy or does the ducting slip in there? also can i use duct tape on a hot hood?? will that make it bubble up? here is the picture of my hood http://i1190.photobucket.com/albums/z458/sbuuttler/03-13-2011/lightsetup.jpg
seperate questionn
here is the picture of my hood http://i1190.photobucket.com/albums/z458/sbuuttler/03-13-2011/lightsetup.jpg im gonna be using rope ratchets soon instead of chains should i change the positioning of the hood to sideways so its easier for the ducting? or which would be the easiest for ducting??
seperate question
would a 80cfm fan be of any worth to this tent? they are 14 bucks at home depot. would my temp drop even 2-3 degrees with one? would it be enough to draw air through the hood??
seperate question
here is the picture of my hood http://i1190.photobucket.com/albums/z458/sbuuttler/03-13-2011/lightsetup.jpg so the notches for ducting are a little bit further apart then the ducting area and my tent has 5 inch flanges would I be able to use 5 inch ducting that would hook up to that 4 inch hood?
the heat is so bad coming from that duct area in my hood I eventually plan on getting a 4inch inline fan in a week or so Im just looking for a really cheap option now im really just super confused about ventilation and i dont have alot of options if anyone could answer any of these I would much appreciate it!
would it be possible to run a duct from the air conditioning vent on the cieling into my tent? I mean i know its possible but what if i taped up like half of the vent for the duct and left the other half open for the room would the air actually make it into the duct or would it just flow into the room or would i have to tape up the whole thing
seperate question
lets say i have a 4 inch inline fan and i want to use it to cool my light with no carbon filter. where does the ducting start for something like that?? like duct to fan to hood to out of the tent? and where is that inline fan drawing air from? or is it pushing the air into the hood and out of the tent. could i see a 4-6 temp decrease in something like that? im just not sure how to hook up a 4 inch inline
seperate question
lets say i have a 4 inch inline with carbon filter and air cooled hood. so it starts from the carbon filter then ducts to the fan which draws air/notsure? out of the carbon filter to duct to hood to out of the tent? if thats how it works how does the carbon filter keep the smell out if its just venting the hood?
seperate question
here is my hood there is 4 notches it looks like around where i can duct something. is that made for an attachment that I have to buy or does the ducting slip in there? also can i use duct tape on a hot hood?? will that make it bubble up? here is the picture of my hood http://i1190.photobucket.com/albums/z458/sbuuttler/03-13-2011/lightsetup.jpg
seperate questionn
here is the picture of my hood http://i1190.photobucket.com/albums/z458/sbuuttler/03-13-2011/lightsetup.jpg im gonna be using rope ratchets soon instead of chains should i change the positioning of the hood to sideways so its easier for the ducting? or which would be the easiest for ducting??
seperate question
would a 80cfm fan be of any worth to this tent? they are 14 bucks at home depot. would my temp drop even 2-3 degrees with one? would it be enough to draw air through the hood??
seperate question
here is the picture of my hood http://i1190.photobucket.com/albums/z458/sbuuttler/03-13-2011/lightsetup.jpg so the notches for ducting are a little bit further apart then the ducting area and my tent has 5 inch flanges would I be able to use 5 inch ducting that would hook up to that 4 inch hood?
the heat is so bad coming from that duct area in my hood I eventually plan on getting a 4inch inline fan in a week or so Im just looking for a really cheap option now im really just super confused about ventilation and i dont have alot of options if anyone could answer any of these I would much appreciate it!
Lankster187
Member
Hey guys, I'm super new to this and I have been trying to find out what the humidity should be in my tent. Its 2' x 3' x 5' with a 175cfm exhaust. I expect it will be kind of hard to keep any moisture in there with that much air flow. Any ideas? Thanks! 
