justparanoid
Well-Known Member
btw the tent comes with 2 six inch and two 4 inch vent holes. Does the scrubber need to be up high? it weights 30 pounds and im worried it wont hold up that much additional weight.
JP
JP
I have a 6 inch carbon filter/fan attachment, it is at about half speed. 4 inch should be fine, but it would have to be turned up all the way (if using a 600 watt) if your doing a 400 watt it think it should be fine but it's cutting it close.Ok i matched the fan to the tent i believe, the 4 inch should be plenty. the carbon is inside the tent and blowing through ducting to the 4 inch ports. So in theroy this will cut all the smells from outside the tent.
Scrubber>fan>ducting>4 inch vent hole
would this work at all if the scrubber was on the floor?
JP
^ what dropastone said. Just be careful pulling the rope to lift the lights if they are held up by the tent. You may need to do a little lifting as you pull the rope.Your gonna like that rope ratchet brah, that's all I use. I can't stand those yo'yo's.
You may have the room for tall plants but that is not an efficient use of light or plant. The penatration of a 400w is not as much as a stronger light source so you will be waisting time and energy. You should think either more smaller plants or fewer plants vegged longer and trained to keep them short and bushy. i.e. SCROG, LST, Topping.... just my thoughts..... anyone grown the ak48's? if so how long did you veg? I have plenty of room for plants to grow tall.
JP