another... my leafs are curling lol

okay i checked on my babies this morning and i noticed that the very pointed edges of all are starting to curl and point up...and then iv got 2 others that are looking alot worse

im running a 150 watt hps , i did have it about 6 inches from the top
and iv also got a fan blowing across them

my temp is 74-78 never over 80 degrees inside the cab

im running 75% coco coir 25% perlite some time release lime+micros and im using osmocote plus as a ferlitizer.


so far iv raised the light to 12 inches and iv added 2 cups of water with some wicks in them to help humidity
(not sure what the humidity is i dont have a hydrometer yet)

and they havent gotten better all day is this something that will take time to go away?
also im hoping its not the oc+ overfertilizing them as that would suck id have to get new coco coir, perlite and transplant them

any ideas as to what it could be?there about 6 days old

Its either a heat or Ph issue....my guess Is Ph is out of wack!

viper2020cobra said:

im running a 150 watt hps , i did have it about 6 inches from the top
and iv also got a fan blowing across them

my temp is 74-78 never over 80 degrees inside the cab

Click to expand...

you gotta explain your secret on the heat, mine gets around 90 degrees, at night..... dunno why and have tried everything except exhaust tubes or an ac, but that's overboard for a 150w.

It could be a pH issue I got test strips but the damn things only go to 6.8 and any lower I'm just guessing. But I've not been phing the water . also the lime I added is suppose to raise the soil pH.

The runoff is 6.5 ph

StevenSD420 said:

you gotta explain your secret on the heat, mine gets around 90 degrees, at night..... dunno why and have tried everything except exhaust tubes or an ac, but that's overboard for a 150w.

Click to expand...

Idk bro Lol my house is set to 72 and I've got remote ballast and double the passive intakes as well as a 70 cfm exhaust

might be the lime i added? no matter what ph i water with the runoff is always dead on at 6.8ph

It's a foot above the plants? Maybe to close for a seedling

Wubstepp said:

It's a foot above the plants? Maybe to close for a seedling

Click to expand...

i wouldnt think so with a 150 watt hps. it was actually 6 inches and they have been fine for 6 days since they poped

Move your plant up atleast 12inches above plant. I have the same 150watt light. Move it UP! Lol

Pass420 said:

Move your plant up atleast 12inches above plant. I have the same 150watt light. Move it UP! Lol

Click to expand...

i moved it up to 12 inches earlier im waiting to see if its had any effect

Ok. I would go a little higher if your still curling. There babies remember that. They don't need that much light.

Problem is still present....and the worse of ones are staeting to tutn very yellow and the others are getting a yellow tint to them...

The yellow is coming from the center out

Need help dont want them to die

Beginning nitrogen overload from your medium. Water only, no nutrients. Transplant.

It is the lime. The plant looks like it is going to take right off. Just keep watering and when needed add ferts as usual and when it gets bigger then transplant it into a larger pot.

My ferts are time release osmocote plus . I can't stop them unless I repot into new coco and wash then old from the roots

I think I used wayyyy to much of them. But i read it dosent matter how much you use because there time release