Check Out My Grow! Let Me Know What You Think

genuity

Well-Known Member
looking good,im starting to see more n more of these cola grows,looks like fun
gots me thinking.
 

RJGrowOp

Member
Hey coreyb, I was really interested in your other thread about the lumatek bulbs....I got a 400 lumatek bulb and ballast that I'm about to put up.....but I wanted to know if you have seen any of those results in this grow? How did the lumatek compare to the sunmaster? (sorry for changing the topic)
 

RJGrowOp

Member
check out my other thread https://www.rollitup.org/indoor-growing/378459-specs-comparisons-600w-hps-bulbs-post4828736.html#post4828736

i know there 600 watters but it should give you some idea

and no the lumatek bulbs are fairly new i havnt seen anyone do a caparison grow but i will be i just got two new 600 W lumatek bulbs and im going to be using those alongside 3 sunmaster bulb

stay tuned
Kooooo....Thx for the link. Really good info on there...
+rep
 

swaggersDlite

Well-Known Member
that pot looks yummy, but what kind is it and what did you yield all together how many plants and what was the average size of them at harvest ???
 

[email protected]

Well-Known Member
I have a suggestion though: how about to arrange the video based on the music genre; e.g. pop, rock, jazz, classical, new age, etc. That way, it will be easier to find one's favourite tune on your 'on-demand' folder...
sorry im not following???? wtf r u talking about

and as fo yeild i dont know they just hung up to dry so i havnt weighed them yet
 

MedHeadGRWR

Active Member
Also can you go threw your exhaust set up? I just got all my equipment and am thinking about how I want to control temps (have two thermostats, one simple one that has a setting for day and night and a second fancy one that can control fans, temps, humidity, and c02). I have six of the 600 watt Lumatek ballasts w/ lumatek high par bulbs, three 8" high output Can Fans and one 6" high out put Can Fan along with an 8" Uvonair Corona Ozone Generator....Yield Master air cooled hoods...trying to figure out how to keep it warm enough and cool enough...setup is in a basement where outside temps get cold (poured concrete walls and floors)
 

[email protected]

Well-Known Member
sure its quite simple i have one 8" vortex fan pushing 840 cfm it sucks in though my ligts and out under my house i have a cheap 30 dollar thermostat made for vents i believe. im thinking when i turn on my other two new light for the first time i might have to get another fan but for just those three the one fan works great. My hoods are 6" ventable and right off of my vortex i have a 6x4x8 inch splitter the six inch goes to my lights and the 4 inch goes to my veg closet. to circulate air from my veg to my flower room when the thermostat turns the main fan of i have another small inline 4" fan(from home depot) in the inlet vent of the veg closet. this keeps my veg between 75 & 85 and my flowering room from 65-75 here some pics to help you understand it a little better. I also have a home ac filter over the main flower room inlet witch suck fresh air from outside(the filter also helps with people being able to see the light through the ducting at night). I also wraped the fan in insulation to reduce noise. If i could of done anything differant i would of hung the fan from bungee cords, the vibration and sound really travels


IMG_2286.jpgIMG_2290.jpgIMG_2291.jpgIMG_2282.jpgIMG_2281.jpgIMG_2288.jpgIMG_2285.jpgIMG_2289.jpgIMG_2287.jpgIMG_2280.jpgIMG_2283.jpgIMG_2284.jpg
 

mcpurple

Well-Known Member
man those buds are still hanging. are they dry yet, dont leave them out to long, they might get real crispy
 

MedHeadGRWR

Active Member
Thanks man, exactly what I was looking for. Like I said I have 6 600's so I was thinking of doing one 8" can fan to three lights, then another 8" can fan to the other three lights for cooling....then my last 8" can fan would be used to exhaust the room air and my 6" can fan would be used as an intake with a 6" Hepa filter pulling air from the basement in. all this would connect to one main 8" duct that would then be filtered with the ozone generator and exhausted out my chimney. I also have a couple inline mufflers but I like the insulation idea and bungee cord idea. I will be building in the coming week so I may be back for more ideas. Nice grow and good luck with the new additions.

+ rep for the help and pics, thanks
 

[email protected]

Well-Known Member
okay heres an update. I finally pulled down and trimmed the bud and i can say im not very happy with Dutch Passion Blueberry. the buds are airy and it does not seem to have that much crystals. I used CES(cutting edge solutions) nutes on this go and i really do not like the results. i got a little over 210 grams of trimmed bud from one 600w HPS. Although the buds look big they lack density and potency. That said the smell and taste is incredible and it hasnt even fully cured yet.

the next go i have with this strain is being fed with AN(advanced nutrients) there lookin a little better but are still airy. Ill post pics of that grow in a little


IMG_2295.jpgIMG_2296.jpgIMG_2301.jpgIMG_2303.jpgIMG_2302.jpgIMG_2300.jpgIMG_2297.jpgIMG_2305.jpgIMG_2298.jpgIMG_2304.jpg
 
Top