Diyleduk Scope 240 led strip light Upgrade

Moflow

Well-Known Member
I received a package from https://diyleduk.com a couple of days ago.
It contained 5 of his new V2 enhanced spectrum strips for me try out.
So a BIG thank you to @diyled ......:grin:
The consist of 120 Samsung LM301Bs, with 6 x Cree XPG3 660NM and 2 x Cree XPG3 730NM Diodes.
Well packaged, as expected.
20191108_161704.jpg20191108_161630.jpg
20191108_161759.jpg
20191108_161726.jpg
They are an easy swap out for any other 2ft strip - 610mmx40mm
12 bolts to remove and 2 wires off old strip, remove old strip off the heatsink and replace with new strip, bolt on, 're insert your 2 wires into new strips, plug her in! Lol
20191110_204708.jpg
Several mins later.....
20191110_210026.jpg
Her back end .... wiring.
20191110_210149.jpg
All's needed is to plug it in......
 

Moflow

Well-Known Member
So, I have it in a new cheap as chips 4ft x 4ft x 6ft tent along side an HLG 550 V1.
I've 5 X RQS Royal Gorrilla plants waiting to go in there shortly to test the new strips with but here's what's in there now.
3x RQS Royal Gorrilla plants and a Moby Dick from Seedsman.
42 days of 12 on 12 off. Potting compost mix and vermiculite. Sprinkle of Epsom in the bottom of pots.
Tomatorite feed and sometimes a dash of cal mag.

The new enhanced spectrum strips are running at 200 watts. Max wattage 270
Hlg 550 V1 is running at 200 watts. Max wattage ~510
400 watts in the 4x4 is a tad light but the the plants get ~800 umols I'd guess and they have room at edges.
When I get the par meter back next week I'll take some readings
Moby Dick front left
20191110_211008.jpg20191110_211014.jpg
Moby Dick
20191110_211039.jpg
20191110_211211.jpg
Gorrilla
20191110_211108.jpg

The Moby Dick is big so I hadda raise the Gorrillas up
20191110_211127.jpg
Heatmat keeps the chill off them.
There's a fan above lights pushing heat down
Doing ok for lights out temps of ~ 14°C
Lights on temps of ~ 22°C.
I really must get some good insulation for the tent....
20191110_211356.jpg
:bigjoint:
I'll update when I get the par meter back and new Gorrillas in there
Enjoy
 

Airwalker16

Well-Known Member
I received a package from https://diyleduk.com a couple of days ago.
It contained 5 of his new V2 enhanced spectrum strips for me try out.
So a BIG thank you to @diyled ......:grin:
The consist of 120 Samsung LM301Bs, with 6 x Cree XPG3 660NM and 2 x Cree XPG3 730NM Diodes.
Well packaged, as expected.
View attachment 4419374View attachment 4419375
View attachment 4419376
View attachment 4419377
They are an easy swap out for any other 2ft strip - 610mmx40mm
12 bolts to remove and 2 wires off old strip, remove old strip off the heatsink and replace with new strip, bolt on, 're insert your 2 wires into new strips, plug her in! Lol
View attachment 4419386
Several mins later.....
View attachment 4419387
Her back end .... wiring.
View attachment 4419388
All's needed is to plug it in......
Also, you never state what CCT the Sammie's are. 3000K I'm guessing?

BTW, that blue anodization is Fucking slick. Where'd you pick those up at?
 

Rocket Soul

Well-Known Member
Very nice Mo, we all love side by sides, any chance we could see a match up in ppfd between this and some regular sammies, but using fotop style density and coverage. Sort of spectrum versus spreadout/diffuse lighting? Not worried about the watttage of each side really, more interested in comparison between red sup from strips (light hits the cannopy from angles) and tight fotop style lighting (light is like blanket hitting cannopy from all angles).

Growing with fotops weve seen some interesting stuff even w relatively low tech cchips
 

Moflow

Well-Known Member
Hmm... Personally I'd rather all the 730's be 630's or more 660's. Hell, maybe even 400-470's for a bit of blue. I don't see a point in far red being on all day long.
Using red, far red for the Emerson Lake and Palmer effect.
@diyled is eying up a pick n place machine with a view to making his own blue centric strips to fill in the blue spectrum.
Early days yet but they are in the pipeline.
 

Moflow

Well-Known Member
Slight error on my part......I was mistaken on the Cree 660nm xpg3.
The 660nm chip is in fact the Samung LH351H Deep Red (660 nm)

Sorry for any confusion. :lol:
 
Last edited:

Moflow

Well-Known Member
Also, you never state what CCT the Sammie's are. 3000K I'm guessing?

BTW, that blue anodization is Fucking slick. Where'd you pick those up at?
Yes, 3000K
The heatsinks are from @diyled website.
 
Top