Diyleduk Scope 240 led strip light Upgrade

Moflow

Well-Known Member
4 x Royal Gorrillas in 10 litre pots transplanted to ~25 litre pots.
Compost and perlite, sprinkle of Epsom salts in base.
Mild feed with Tomatorite , 4 litres per pot. Warmed water up a bit as tap water is freezing cold.
20191113_125427.jpg
Vegged under 3 x Samsung F strips at 84 watts. 24hrs lights on to compensate for the cold.
Total number of plants under the light was 14. 4 in 6" pots 4 in 3" pots 2 in yougert pots.

The plants are now in the 4 x 4.
I've turned off the hlg 550 , put it to side of tent
They are under the Scope upgrade light. 200 watts. About 16" away. I'll veg for a week then flip to flower.

20191113_142441.jpg20191113_142413.jpg
The lights and heatmat were off all night so it' was initially cold in there.

20191113_142618.jpg

You'll not know them in a week.... lol
The Moby Dick and the Royal Gorrillas are now under the FOTOP Boards, disco boards, Quantum boards, Growgreen boards etc etc etc
20191113_142829.jpg
Enjoy
 

Attachments

Frank Nitty

Well-Known Member
@Stephenj37826 has some 288s with those in it that he was telling me about... I had never heard of them and was wondering if anyone knew anything about them and how they worked...
 

Rocket Soul

Well-Known Member
@Stephenj37826 has some 288s with those in it that he was telling me about... I had never heard of them and was wondering if anyone knew anything about them and how they worked...
I think you might be speaking aboout the 324s?? I know Prawn tried those, they were extra red/high cri boards. I think he kitted someones grow them, liked what he saw and designed the High lights.
They werent a complete hit, i believe the paper stats didnt look too great but seemed to do thhe trick to me. But hard to say if it was the leds or the high cri/extra red. I believe they were sub lm301b as far as photons.
 

Frank Nitty

Well-Known Member
I think you might be speaking aboout the 324s?? I know Prawn tried those, they were extra red/high cri boards. I think he kitted someones grow them, liked what he saw and designed the High lights.
They werent a complete hit, i believe the paper stats didnt look too great but seemed to do thhe trick to me. But hard to say if it was the leds or the high cri/extra red. I believe they were sub lm301b as far as photons.
He said they were too costly for what he wanted... Ill take em off his hands and cee what they do... I have lights that i can add to them in a tent if needed...
 

Frank Nitty

Well-Known Member
He said they were too costly for what he wanted... Ill take em off his hands and cee what they do... I have lights that i can add to them in a tent if needed...
I just appreciate the fact that he went out of his way to look out for me like that...
 

Moflow

Well-Known Member
I sorted the hanging height properly with the par meter.
4ft x 4ft - 1.2m x 1.2m tent
The light measures 19.6 inches x 24 inches - 500mm x 615mm
20191117_144127.jpg

The Scope 240 is set at 200 watts, 26" - 66cm above the canopy.
I done a par map at Canopy level to show what it's capable of.
20191117_211132.jpg
Nice numbers for 200 watts in a 4 x 4 for vegging.
20191117_143525.jpg
It's all about the reflections....
source.gif

20191117_143520.jpg
So far so good.
Insulation is coming this week lol
 

Moflow

Well-Known Member
Temperatures are arising in the tent at last.
Done a MacGyver with some parts I'd lying about.
I'm now using a 3" - 80mm 12v pc fan to remove air from the tent.
I attached it to a Gelid solutions fan speed controller, running it on minimum ~5v.
Running it off a Meanwell APV 1212 Driver.
The carbon filter and main 4" - 100mm fan are now recirculating the scrubbed air in the tent.
5 hours later and temps were reading 21 - 22°C 69 - 72°F.
I'll keep an eye on it this evening but so far so good.
 
Top