First Grow- DWC Hydroponics & CFLs

[ru8fru]

what exactly does that entail? where you live? how did you receive it?

 

[GypsyBush]

Hey Dudes...

What up?

Gypsy here.... checking out your grow... nice, I like it !!!

I will do a little rambling about lights further down.. please excuse me... I am an idiot with the habit of volunteering advice... hahaha...

Which brings me to your roots...

They have a little root rot form your RW cubes being too wet...

I have a suggestion... it's a bit lengthy.. but read these 3 threads like homework... swim through it all and you will come out better growers for sure...

Here we go...

Get a harvest every 2 weeks

A batch of clones in rockwool

Al B. FAQt

I know.. it's like... more than FOUR THOUSAND POSTS... RIDICULOUS !!!!

But totally worth it !!! Guarantee it...!!!

Oh...! My signature has a couple of neat things... might give you some ideas...

Now some cooments that were made... and my ramblings...

​

...the RW had a significant amount of moisture.

I've always woundered should you skeewz some of water out of the RW before putting seedlings in? my reasons for thinking so are to prevent root rot. I usally leave about 1/2 the water in the RW that it soaks up. Any comment of suggestions about soaking RW???

When you sqeeze the RW you remove air pockets. salad spinners work really well or just shake 'em - read it somewhere on here

Thanks my methods of just squeezing have had 100% success but i like the sound of just shaking the excess water out.

Stoner is right...

You should NEVER squeeze RW... EVER...

Unlike a piece of foam, it does not spring back... limiting the amount of air present in the cube...

The cube should also NEVER EVER BE WET/SOAKED...

Damp is what you are looking for...

If you shake a damp cube, no water will fling out...

Damp never wet...

So our clone's RW dried out and they took a turn for the worst. luckly i spotted them and quickly watered them. a few hours later they were perked up again.
I am considering buy a LED to veg our clones. I am thinking this one sounds cool and cheap http://cgi.ebay.com/BRIGHT-18W-225-LED-ALUMINUM-Hydroponic-GROW-LIGHT-Panel_W0QQitemZ310107416195QQihZ021QQcategoryZ42225QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

anyone suggest a better one in the same price range 30-40$. we are only looking to veg 6-10 clones at a time.

I wouldnt suggest that led

I agree with not suggesting LED's... not for a few years anyways...

How about one of these... I know I know... HPS/MH... blah blah blah...lol..

You can probably get the parts at your local lighting supplier... They have in AK for $60, I know they got it in the States for less cash...

or you could just buy the kit too....

400 watt High Pressure Sodium Ballast Kit


250 watt Metal Halide Complete Ballast Kit


400 watt Metal Halide Complete Ballast Kit



A cooltube will help you get rid of heat issues, and allow you to treat the HPS almost like a fluorescent light.. really close without burning...

I know.. money.. fans.. lights.. but believe me.. there is a WORLD of difference in flowering with low intensity rather than HIGH INTENSITY ...

I couldn't believe the difference in the same strain...

I run a 600 watt HPS in a cool tube inside of a homemade tent that measures 36x20x54... and I have no trouble keeping it at 75F...

Not telling what to do, but pretty soon you will have 317 watts of cfls all over the place, not putting out nearly as many lumens/par as the HPS and it is just a hassle... fluffly buds.. cords everywhere...

I don't know.. I guess light and plants are kind of like oil and engines...

Any oil is better than no oil, but the correct type of oil is infinitely better than the incorrect one...

Also... don't waste your money upgrading 17.3 times...

Save up and buy the right shit, go one step bigger than you think you will ever need, believe me... you will thank your self...

Buy once, never have to upgrade again...

I was using CFLs and decided I needed a 400 watt HPS.. so I bought a 600... ... I wanted a 4"/270cfm fan .. so I bought a 6"/424cfm fan...

Now, I have a little more space, and if I decide to go bigger I do not need to buy a new light, new fan, new ... shit is expensive...

Smell... ha!

Check these...

GrowBright 6" Inline Fan & Charcoal Filter Combo

GrowBright 4" Inline Fan & Carbon Filter Combo

OK enough rambling...

I will shut up and go away now...lol....

You guys take care and be safe out there.. them "squares" are everywhere...

I'll shove off with a pic of the tent and some of my miniatures for you guys to enjoy...

Gypsy...

DumbAssCan'tKeepFromHijackingYourThreadSorryI'mStoned~lol[/B]]
So I figured this would be a good time for another comparison... lol...

The first picture was taken on 09/06/08...

The second picture is the same clone on 09/21/08...
Not bad for 15 days eh?!

All of the following pictures were taken just a few minutes ago... so almost 2 months have passed...

I am sorry I do not have a shot of the plant with the roots hanging down... They are about 5 feet long and I could not figure out how to get the shot without my hand on it... until I put it back and then I am not going to fuck with it anymore...

So... these are the shots you get ... but it should illustrate very well the current stat of affairs....lol...

Oh, and I have already taken 6 cuttings from this, before the pics...

The roots are the ones on the right, closest to you...

A backside shot, showing what is, in my opinion, the perfect "HPS veg stretch" for cloning...

This next photo reminds me of the Incredible Hulk for some reason...

Braids of Life...

And a final, close up shot...

Cheers...

 

[diggitydank420]

Yes we use tap water. The the stems of the fan leaves have always been purple. our nutes have mag in them like 3.5%. Thanks for the heads up, im gonna investigate that.

Most likely you do have an Mg deficiency. Tap water is most likely to contain a high amount of Calcium, which will lock out the Magnesium. Don't over-do the epsom salt or you'll end up locking out Ca! I had the same issue before.

 

[HydroBandits]

what exactly does that entail? where you live? how did you receive it?

were in cali so medical marijuana is legal. To get it prescribed your gonna need a diagnosis from a doctor for chronic pain, anxiety, chronic headaches. There are a bunch of illnesses that will allow you to get prescribed marijuana.

After you have your doctor note, go to a medical marijuana doctor(search internet for one or ask people who have card which doc they went to) and they will prescribe it for you, it cost 150 in registration fees a year but the reduced stress make that 150 worth it.

 

[ru8fru]

so this doesn't make it legal for you to grow it though does it? Just for you to posses it? Do they actually prescribe you marijuana or what?

 

[GypsyBush]

I hope my post was helpful...

 

[rocket high]

alrite boys good to see you didnt giv up on them ,and start again , am doing barneys sweet tooth and white rhino X G13 (MY OWN CROSS) in large 6ft N.F.T channels al post pics when there ready to go in

 

[growinman]

Hey there, HydroBandits!! Glad to see your getting some more feedback finally! Hope all is going good for you guys!

 

[HydroBandits]

so this doesn't make it legal for you to grow it though does it? Just for you to posses it? Do they actually prescribe you marijuana or what?

Yes in we are allowed to grow 24 plants and posse 1 pound or somethin. If you wanna learn more read prop 215 and senate bill 420(yes it was really bill 420) well those only apply to californians but there are 12 other states that allow medical marijuana.

I hope my post was helpful...

Yeh it was very detailed too. thanks for the input.

Hey there, HydroBandits!! Glad to see your getting some more feedback finally! Hope all is going good for you guys!

Yeh nice to see some people taking interest. and Thanks Growinman for all the feedback, you've been here since the begining. We've come along way since we started.

Update:

Changed the rezs today and our girls is lookin fab. buds are puttin on size.

Our seedlings are comin along, well for seedlings.
Hope to see some new growth from the clone soon.

Thanks all for taking interest and will update with pics in a day or so.

 

[motif]

congrats thus far hydrobandit, are you normally supposed to take clones from the plant in veg stage? i just recently tried cloning last night on my two plants and i dunno if they are gonna survive (they seem very lettucey-like)....

Also how soon should i be able to sex my plants? they are week 3 in vegging, and still cant tell :\ Check it out in my sig

 

[HydroBandits]

congrats thus far hydrobandit, are you normally supposed to take clones from the plant in veg stage? i just recently tried cloning last night on my two plants and i dunno if they are gonna survive (they seem very lettucey-like)....

Also how soon should i be able to sex my plants? they are week 3 in vegging, and still cant tell :\ Check it out in my sig

3 weeks is early to tell. around week 4-5 of veg you should be able. or a week or so after you go 12/12 you will be able.

 

[onthedl0008]

Bandits what kinda insane ideas uz got these days.. hows it going lol.

 

[HydroBandits]

Bandits what kinda insane ideas uz got these days.. hows it going lol.

ha how did you know we were doin somethin.

We just created a carbon scrubber using this http://www.business-supply.com/platinum-air-hepa-air-purifier-80-sq-ft-room-capacity_HWL16200_product.html

and panhead's filterhttps://www.rollitup.org/grow-room-design-setup/63004-my-3-carbon-filter.html to sit on top of the intake where the normal filter would go.

Not sure how well it works to far but the fan was near free from salvation army so can really go wrong.

 

[onthedl0008]

Anyone that maps ther net pots before hand is up to things haha sounds good man going to check the threads...Panhead keeps it simple man..Deffinetely listen to him.

 

[HydroBandits]

Update:

Here are some pics from today. We are 32+- days into flowering.
pics 1 & 2 are of cola. 3 is side bud

And our clone and seedlings are streching. We need to workout our lighting situation for them.

 

[diggitydank420]

Lookin' good!

 

[motif]

how close should cfls be on clones/seedlings? i read somewhere here for clones, 6" away first day then gradually closer from then on... im attempting my first cloning right now, one looks kinda wilting and the other sort of too but standing up better... been 3 days since i put them 6" away from fluros, bout to turn on the cfls that are right next to them, but i dont know if its growing roots yet cuts its in rockwool and i dont want it to grow too fast without roots cuz that = DEATH!!

 

[growinman]

Update:

Here are some pics from today. We are 32+- days into flowering.
pics 1 & 2 are of cola. 3 is side bud

And our clone and seedlings are streching. We need to workout our lighting situation for them.

Well ,the buds sure are getting some size!! Right on! Now watch them explode!!

 

[HydroBandits]

Well ,the buds sure are getting some size!! Right on! Now watch them explode!!

Gosh I hope so. We shale see.

We are getting a 2ft 2 bulb T5 setup from a dude off craigslist. for 30 bones. Gonna put it above the seedlings and clone.

 

[420weedman]

Update:

Here are some pics from today. We are 32+- days into flowering.
pics 1 & 2 are of cola. 3 is side bud

And our clone and seedlings are streching. We need to workout our lighting situation for them.

looking good guys, they look like they are filling in nicely