Cutter Electronics: Complete DIY COB kits

Redoctober

Well-Known Member
Looks like a neat light Airwalker! I'll definitely take a closer look. I think my preference is for discrete diodes so I can smear the light over a larger area and not worry about point sources.
I made a schematic for a new DIY project with COBs as well as lots of single diodes, kind of similar to groumau5's Canopy 10.
Also I'm buying a bunch of other stuff from Cutter and was attempting get everything in one place rather than shop around...You know how that goes!
They have these diodes over at ledgroupbuy as well as the hyper violet (430nm) ones that I want, both solderless, but they're not Cree and I have no idea what the bin is so I'm sort of holding out for Cutter. I know Mark has no control of when things actually show up, I was just trying to gauge approximately when these various parts might be in so I can plan my own schedule accordingly
 

welight

Well-Known Member
Hi Mark, so as far as the MAU5 kits go, the awesome new black anodized HS14080P heatsinks aren't included yet is that right?
I'm assuming they haven't come in yet

Also might you have an estimate as to when these 660nm Cree XPE diodes will be back in stock?
(http://cutter.com.au/proddetail.php?prod=cut1868)

Thanks
yes we will be supplying the new heatsinks with the kits ongoing, heatsinks in stock today, XPE photo reds are also in stock
Cheers
Mark
 

Redoctober

Well-Known Member
yes we will be supplying the new heatsinks with the kits ongoing, heatsinks in stock today, XPE photo reds are also in stock
Cheers
Mark
I LOVE YOU!!!

Oh one more quick question, I was wondering of it possible to get this star (link below) in a solderless? I don't know how the solderless option works i.e. if that's something you do at Cutter or if you have to order them from the manufacturer like that, and if there is a minim order for something like that? Just curious because that particular one doesn't have a solderless option on the site.

Thanks for everything Mark!

Cutter-20STRC35L-UV430
 

welight

Well-Known Member
I LOVE YOU!!!

Oh one more quick question, I was wondering of it possible to get this star (link below) in a solderless? I don't know how the solderless option works i.e. if that's something you do at Cutter or if you have to order them from the manufacturer like that, and if there is a minim order for something like that? Just curious because that particular one doesn't have a solderless option on the site.

Thanks for everything Mark!

Cutter-20STRC35L-UV430
No worries, I have added the solderless star option to the 430nm. We manufacture all the boards here so any colour, manuf led we have we can mount to any board option we have in stock
We have a youtube video showing how we manuf SL boards, we manufacture all LEDGROUP boards here

cheers
Mark
 

Redoctober

Well-Known Member
No worries, I have added the solderless star option to the 430nm. We manufacture all the boards here so any colour, manuf led we have we can mount to any board option we have in stock
We have a youtube video showing how we manuf SL boards, we manufacture all LEDGROUP boards here

cheers
Mark
This is why Cutter is so awesome!!
Neat video too Mark, it's like an episode of "How It's Made" but with a way funkier soundtrack!
I always enjoy seeing behind-the-scenes footage like that.

I have some 22awg solid core 300v wire for the mono stars, I'm assuming this is acceptable?
Can't wait to put this all together!

Thanks again!
 

okletsgrow

Member
like airwalker said 1 x 3w diode at 700-1000ma per 4 sqft sounds about perfect. i mount mine to the ceiling now , with a tight lens like 20-45 degree.

- i ordered a bunch of stuff from Cutter to test out. 4up far red boards for cheap $11-12
cheaper, easier, and better than rapid led or steves
http://cutter.com.au/proddetail.php?prod=cut2202

$3.50 quad optic that works with their board
http://cutter.com.au/proddetail.php?prod=cut1000

driver: APC12-12 by meanwell for $6

stick it on with the Cutter die cut pressure sensitive TIM
http://www.cutter.com.au/proddetail.php?prod=cut952
Hi, on the cutter site for the far red boards we have 'add 4 0ohms resistor" my question is :

We need add the resistor for mount it ?
 

Banana444

Well-Known Member
Hello cutter, question for we @welight ...im getting ready to order a mau kit along with 4 of the angelina reflectors for another diy light with cxb3590 i already have, it appears the adapters to mount the reflectors are out of stock, are the kits shipping with adapters and are they available to order separately?
 

Airwalker16

Well-Known Member
Hello cutter, question for we @welight ...im getting ready to order a mau kit along with 4 of the angelina reflectors for another diy light with cxb3590 i already have, it appears the adapters to mount the reflectors are out of stock, are the kits shipping with adapters and are they available to order separately?
You in the US?
 

welight

Well-Known Member
Hello cutter, question for we @welight ...im getting ready to order a mau kit along with 4 of the angelina reflectors for another diy light with cxb3590 i already have, it appears the adapters to mount the reflectors are out of stock, are the kits shipping with adapters and are they available to order separately?
no problem, all back in stock now
Cheers
Mark
 
>
Top